4" BT.rkt Rocksim Design File

Visit The Rocketry Forum to download 4-inch-BT.rkt

To use the design file above, you need Rocksim which is available from Apogee's website.

CG: 32.1869 inches from front
CP: 45.3985 inches from front
Margin: 3.30 Overstable

Parts Breakdown

• LOC/Precision Ogive Nose Cone
• Madcow Rocketry Mass Object
• Apogee Components Paper Body Tube (3.9620 in)
• LOC/Precision Paper Ring (3.8300 - 3.9000 in)
• b2 Rocketry 1.3 oz. Ripstop Nylon (SkyAngle) Parachute (32.50 in)
• Apogee Components Paper Body Tube (3.9620 in)
• LOC/Precision Paper Body Tube (1.6400 in)
• LOC/Precision Aircraft plywood (LOC) Ring (1.6400 - 3.9000 in)
• LOC/Precision Aircraft plywood (LOC) Ring (1.6400 - 3.9000 in)
• LOC/Precision Aircraft plywood (LOC) Ring (1.6400 - 3.9000 in)
• b2 Rocketry 1.9 oz. Ripstop Nylon (SkyAngle) Parachute (21.80 in)
• Dave Aircraft plywood (Birch) Trapezoid Fin Set

What You Can Do

• Submit a File Related to this Rocksim Design File
• Submit a Rocksim Design File to RocketReviews.com

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/4-btrkt.html">4' BT.rkt</a>

Text Link in BB Code (for forum posts)

[url=http://www.rocketreviews.com/4-btrkt.html]4' BT.rkt[/url]

Image Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/4-btrkt.html"><img src="http://www.rocketreviews.com/rocksim/55101/square_image.jpg"></a>

Image Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/4-btrkt.html]
  [img]http://www.rocketreviews.com/rocksim/55101/square_image.jpg[/img]
 [/url]
[/center]

Thumbnail Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/4-btrkt.html"><img src="http://www.rocketreviews.com/rocksim/55101/thumb.jpg"></a>

Thumbnail Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/4-btrkt.html]
  [img]http://www.rocketreviews.com/rocksim/55101/thumb.jpg[/img]
 [/url]
[/center]

Select the appropriate above text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.