bannerbanner
 Body Tubes      Rocket Kits      Apogee Components      Buy Comanche-3 Kit

Claude Maina's Page

2011-05-11

HotRod Rockets Buffalo (Kit)

Review

Brief There are two versions of the Buffalo offered by HotRod Rockets, the standard or 'Full Buffalo' which comes with an ejection baffle and 24" nylon parachute, and the 'Buffalo Speed' with comes with a longer 29mm motor mount tube, no baffle or parachute. There is also an electronics bay kit... [More]

2009-06-19

Cygnus Rocketry 76er (Kit)

Review

Brief: This is a very tall 4FNC rocket that is very similar to the Estes Mean Machine and Sunward's CFX-Six Footer. There is no skill level associated with the 76er, but since both the Mean Machine and CFX-Six Footer are considered Skill Level 2, I'll rate this the same. It is easy to... [More]

2009-06-02

Standard Rockets Assembly Tool (Kit)

Review

(Contributed - by Claude Maina - 06/02/09) Brief: The Standard Rockets Assembly Tool is a fin alignment and attachment jig for low to mid power rockets. The tool consists of a stainless steel 8" square base, four stainless steel fin plates, three sets of strong magnets, and two... [More]

2009-04-23

FlisKits Night Whisper (Kit)

Review

Brief: This is truly a unique kit. It has a sleek, non-symmetric, futuristic look with an elaborate fin pattern and a split body tube design that creates an ejection baffle. It is a Skill Level 3 with recommended engines, B6-4 and C6-5. There are a lot of parts, including many fins that... [More]

2008-10-21

Scratch Boot Hill (Scratch)

Review

(Contributed - by Claude Maina - 10/21/08) Brief: As soon as I saw Dick Stafford's 'Boot Hill' rocket, I had to build one. It is a fun rocket, and I want to give all due acknowledgments to Dick! That said, I made one modification to Boot Hill that employs rubber bands to pull open... [More]

2008-09-20

Scratch Boot Hill (Scratch)

Review

(Contributed - by Dick Stafford - 09/20/08) Brief: This is a Halloween-themed oddroc based on a toy coffin. It features a 24mm mount and patented 'Coffin Lid Ejection'. Construction: The parts list: One pine (basswood?) coffin from Michael's Three wooden headstones, also from... [More]

Claude Maina


More:

- Link to this Page -