|
  |
Mark H's Page2012-04-13Heavy Nova  Flight Photo by Neil McGilvray / Rockets Magazine - H112 - MDRA [More]
2012-03-11Pro Star  Flight Long burn blue thunder motor put it nearly out of sight. Could see a faint blue/purple flame from below after it started to scoot. - J180-L - MDRA [More]
Pro Star  Flight Nice flight. Lots of thick black smoke. Cool motor. Payload section appeared to have collided with fin can at deployment and cracked a fillet. Fixed fillet with CA and flew it again. - I117FJ - MDRA [More]
2012-02-26Pro Star  Flight Good flight. Maxed out the G64, with this 3lb rocket. Landed on pavement again. - G64-7W - CHS [More]
2011-12-24Pro Star  Flight Good flight. - G76-7 - CHS [More]
2011-12-11Rock-It  Flight Great flight to about 800 feet - E9-6 - CHS [More]
Groove Tube 2.9 x Upscale  Flight Classic rocket, classic reload. A perfect high pressure day. Good flight. - H128-7 - CHS [More]
2011-11-20Phoenix Bird 3 x Upscale  Flight Perfect first flight on an Aerotech Warp 9 I599. - I59 - MDRA [More]
2011-10-28Pro Star Flight Nice slow climb that disappeared in overcast sky. Rocket came down inside the cow fence about 1000 ft away. Very impressive motor with almost 4 second burn. - I110 - Battle Park [More]
Groove Tube 2.9 x Upscale Flight Another impressive flight of the Groove Tube on the Aerotech G138 blue thunder motor. A little late on the deploy. Drilled delay to 8 seconds but probably should have gone down to 6. - G138T - Battle Park [More]
2011-02-28Estes Phoenix Bird (Kit)  Review
Brief
The Phoenix Bird is an Estes remake of the early 80s Centuri Phoenix Bird. Although close in appearance, this version uses BT-55 based parts compared to BT-56 used in the original. The biggest difference though is the Estes version uses through-the-tube balsa fins, and a balsa nose... [More]
2008-08-02Semroc SLS Arcas (Kit)  Review
Brief: A 1/2 scale model of the Atlantic Research Corporation sounding rocket produced in the 1950s and 1960s.
Construction: The kit contains two BTH-70 sized body tubes, laser cut basswood fins, and balsa nose and tailcones. The motor mount is 29 mm with plywood centering rings. Fin... [More]
| Mark H
More: |
- Link to this Page -
You can link to this page using the following HTML or BB Code.
Text Link in HTML (for web sites)
<a href="http://www.rocketreviews.com/mark-hairfield-page.html">Mark H's Page</a>
Text Link in BB Code (for forum posts)
[url=http://www.rocketreviews.com/mark-hairfield-page.html]Mark H's Page[/url]
Select the appropriate above text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.
|
|
|
|
