Estes Mercury Redstone Liberty Bell 7

Estes - Mercury Redstone Liberty Bell 7 {Kit} (2167)

Contributed by Frank Casey

Construction Rating: starstarstar_borderstar_borderstar_border
Flight Rating: starstarstar_borderstar_borderstar_border
Overall Rating: starstarstar_borderstar_borderstar_border
Diameter: 1.60 inches
Length: 23.50 inches
Manufacturer: Estes
Skill Level: 2
Style: Scale

Estes Mercury Redstone

Brief:
This is the third Mercury Redstone kit produced by Estes. I built the original K-41 when I was younger and there really isn't any comparison between the two. This newest kit is more like a snap together plastic model kit. There was not much skill involved in building it other than trying to apply the very shiny peel and stick decals. More on that later.

Construction:
The instructions are not the standard very easy-to-follow Estes instructions. They were more a series of pictures with little text.

The build mostly consisted of snapping together the plastic parts. It was not challenging and went quickly.

Estes Mercury Redstone

Finishing:
I painted the rocket components and then applied the decals. I found that I like peel and stick decals even less for wraps than for other applications. Applying them is pretty much a one shot deal for the most part. Peel and stick wraps are very unforgiving. I got them on OK but didn't really like the shiny look to the decals on the rocket. The finished rocket looks much like a shiny plastic toy.

Construction Rating: 2 out of 5

Flight and Recovery:
I started out with a C6-3 engine because the rocket felt very heavy. I'm glad I did because it doesn't fly all that high.

The specs say it flies to 500 feet but I don't think mine has even cleared 300. Each flight has produced a low altitude flight with ejection happening at around 150 feet or so.

I've had the tower break off a couple of times but it glues back on easily enough with some plastic model cement.

Flight Rating: 2 out of 5

Summary:
On the plus side, this kit could be considered a good entry rocket for someone new to building model rockets who wants to start building scale-like kits.

On the negative side, the build wasn't as satisfying as most. Due partly to the fact that building the kit is comprised of snapping the plastic parts together and then apply my least favorite (peel and stick) decals. Plus there's no balsa to work with.

Overall Rating: 2 out of 5

Flights

Comments:

avatar
D.W. (July 17, 2008)
I would not rate the kit as bad as in this review, because the model has some advantages as well as disadvantages compared to the original ESTES kit from many years ago. The decals are clearly a disadvantage, as you describe it accurately in your review. So I replaced them with waterslide decals from Tango Papa. But in fact I do like the plastic parts, especially the fins. They make the model sturdier but also heavier. So I have modified it for D-engines - no problem with low altitude flights anymore.
avatar
J.E.T. (July 12, 2010)
Try the 18mm AeroTech reloadable D engines in this model. It flies much, much higher and faster.
avatar
Hans "Chris" Michielssen (August 16, 2016)

The tube diameter is slightly larger than 2" in diameter. It is the old Centuri ST-20.

The capsule and tower are from the Centuri kit.

comment Post a Comment