Scratch - Maceys Meat DepartmentOriginal Design / Scratch Built
Contributed by Ken Adams BriefThis was a scratch built design using leftover paper tubes from the local meat department. Only part that wasn't scratch was the Shockwave nosecone. The original Rocksim file is "The Shockwave" before I decided it would be a theme rocket to hang in my meat department for the 4th of July.
Components
ConstructionI first designed the rocket in Rocksim just to get an idea of CG and CP and to determine an appropriate motor. Once I had the basics, the actually assembly wasn't too hard. The nose cone needed little work, just a loop of webbing to attach it. I fiberglassed the airframe (left over paper tubes aren't particulary strong. FinishingI finished the rocket with a red, white, and blue theme for the 4th of July. I used painting tape to make "torn flames" on the front and back. I used the cheapest paint Home Depot sells and it worked great! I did some airbrushing for the logo of the grocery store logo that I got most of the parts from. FlightI flew this rocket with the CTI I800 Vmax. Wow, what an awesome flight. The followingis a video of the flight at Hellfire 16 out on the Utah Salt Flat. RecoveryMy delay was quite a bit too long but everything worked great! Flight Rating: 4
SummaryOverall Rating: 5
What You Can Do
|
|||||||
|
|
|||||||