Bull Pup 12D Rocksim Design File

Contributed by Jonathan Elder

Comments: This is a semi scale model of the AGM-12D Bull Pup missile.

Designer: Estes

Download estes_bull_pup_agm_12d.rkt

To use the design file above, you need Rocksim which is available from Apogee's website.

CG: 7.0232 inches from front
CP: 10.7597 inches from front
Margin: 2.82 Overstable

Parts Breakdown

• Estes Ogive Nose Cone
• Custom Mass Object
• Estes Paper Body Tube (1.3250 in)
• Custom Balsa Trapezoid Fin Set
• Custom Balsa Trapezoid Fin Set
• Estes Paper Launch Lug (0.1720 in)
• Quest Polyethylene LDPE Parachute (12.00 in)
• Custom Mass Object
• Estes Conical Transition
• Estes Paper Body Tube (0.7360 in)
• Estes Paper Ring (0.6508 - 0.7100 in)
• Estes Paper Ring (0.7360 - 1.2830 in)
• Estes Paper Ring (0.7360 - 1.2830 in)

What You Can Do

• Submit a File Related to this Rocksim Design File
• Submit a Rocksim Design File to RocketReviews.com

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-bull-pup-12d.html">Bull Pup 12D</a>

Text Link in BB Code (for forum posts)

[url=http://www.rocketreviews.com/unknown-bull-pup-12d.html]Bull Pup 12D[/url]

Image Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-bull-pup-12d.html"><img src="http://www.rocketreviews.com/rocksim/26993/square_image.jpg"></a>

Image Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/unknown-bull-pup-12d.html]
  [img]http://www.rocketreviews.com/rocksim/26993/square_image.jpg[/img]
 [/url]
[/center]

Thumbnail Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-bull-pup-12d.html"><img src="http://www.rocketreviews.com/rocksim/26993/thumb.jpg"></a>

Thumbnail Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/unknown-bull-pup-12d.html]
  [img]http://www.rocketreviews.com/rocksim/26993/thumb.jpg[/img]
 [/url]
[/center]

Select the appropriate above text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.