oop_estes_clone_honest_john_k1919.rkt Rocksim Design File

Contributed by Bob Beckey

Download oop_estes_clone_honest_john_k1919.rkt

To use the design file above, you need Rocksim which is available from Apogee's website.

CG: 9.2612 inches from front
CP: 14.2809 inches from front
Margin: 2.51 Overstable

Parts Breakdown

• Custom Ogive Nose Cone
• Custom Conical Transition
• Estes Paper Body Tube (1.3250 in)
• Custom Balsa Trapezoid Fin Set
• Estes Paper Body Tube (0.9760 in)
• Custom Cardboard Ring (0.9760 - 1.2830 in)
• Custom Cardboard Ring (0.9760 - 1.2830 in)
• Estes Paper Launch Lug (0.1880 in)
• Estes Paper Launch Lug (0.1880 in)
• Custom Mylar Parachute (16.00 in)

What You Can Do

• Submit a File Related to this Rocksim Design File
• Submit a Rocksim Design File to RocketReviews.com

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-oopestesclonehonestj.html">oop_estes_clone_honest_john_k1919.rkt</a>

Text Link in BB Code (for forum posts)

[url=http://www.rocketreviews.com/unknown-oopestesclonehonestj.html]oop_estes_clone_honest_john_k1919.rkt[/url]

Image Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-oopestesclonehonestj.html"><img src="http://www.rocketreviews.com/rocksim/27261/square_image.jpg"></a>

Image Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/unknown-oopestesclonehonestj.html]
  [img]http://www.rocketreviews.com/rocksim/27261/square_image.jpg[/img]
 [/url]
[/center]

Thumbnail Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-oopestesclonehonestj.html"><img src="http://www.rocketreviews.com/rocksim/27261/thumb.jpg"></a>

Thumbnail Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/unknown-oopestesclonehonestj.html]
  [img]http://www.rocketreviews.com/rocksim/27261/thumb.jpg[/img]
 [/url]
[/center]

Select the appropriate above text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.