Silver Comet Rocksim Design File

Contributed by Michael Dennis

Comments: Stock Estes Silver Comet - Mass override = as built

Designer: Estes

Download oop_estes_silvercomet.rkt

To use the design file above, you need Rocksim which is available from Apogee's website.

CG: 15.2500 inches from front
CP: 22.2175 inches from front
Margin: 2.68 Overstable

Parts Breakdown

• Custom Ogive Nose Cone
• Estes Paper Body Tube (2.6000 in)
• Estes Paper Launch Lug (0.1880 in)
• Custom Polyethylene LDPE Parachute (25.57 in)
• Custom Ogive Transition
• Estes Paper Body Tube (0.9760 in)
• Estes Engine hook Standard size Mass Object
• Custom Basswood Freeform Fin Set
• Custom Paper Ring (0.9760 - 2.5880 in)
• Custom Paper Ring (0.9760 - 2.5113 in)
• Custom Paper Ring (0.9760 - 1.6007 in)

What You Can Do

• Submit a File Related to this Rocksim Design File
• Submit a Rocksim Design File to RocketReviews.com

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-silver-comet.html">Silver Comet</a>

Text Link in BB Code (for forum posts)

[url=http://www.rocketreviews.com/unknown-silver-comet.html]Silver Comet[/url]

Image Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-silver-comet.html"><img src="http://www.rocketreviews.com/rocksim/27307/square_image.jpg"></a>

Image Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/unknown-silver-comet.html]
  [img]http://www.rocketreviews.com/rocksim/27307/square_image.jpg[/img]
 [/url]
[/center]

Thumbnail Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-silver-comet.html"><img src="http://www.rocketreviews.com/rocksim/27307/thumb.jpg"></a>

Thumbnail Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/unknown-silver-comet.html]
  [img]http://www.rocketreviews.com/rocksim/27307/thumb.jpg[/img]
 [/url]
[/center]

Select the appropriate above text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.