|

PRESS RELEASE
K and S Rockets: New product announcement
June 17, 2008
K and S Rockets is proud
to announce the release of "Triple Insanity".
If you like multi-stages and larger body tube rockets then this is the one for
you.
This multi stage rocket is 1.64" in diameter and when all three stages are
stacked up it is 30.75" tall.
First stage is 24mm motor tube, second stage is 18mm motor tube and third stage
is 18mm motor tube. Load it up with a D12-0 in first stage, C6-0 in second stage and a C6-7 in the third stage to reach
an altitude of 1900'.
The first two stages are tumble recovery and the third stage is streamer
recovery. All fins are laser cut balsa. All body tubes are marked for fin and launch lug locations.
This kit is not an overly difficult to build but does require following
directions.
Triple Insanity Specs:
- Length: 30.75"
- Diameter: 1.637"
- Altitude: 1900 Ft.
- Recovery: Streamer
- Engines: Booster: D12-0, Second Stage: C6-0, Third Stage: C6-7
Contact Info:
K and S Rockets
814-270-1700
Email
Website: http://www.kandsrockets.com
|