Estes - Black Brant II Kit

CP Method: Rocksim/Rocksim
CP Position From Front: 21.37 inches
Decals: Waterslide
Fin Material: Balsa
Length: 24.88 inches
Manufacturer: Estes
Model: 1958
Motor Size: 24 millimeters
Nose Cone Material: Plastic
Power: Low-Power
Product Type: Kit
Production Years: 1986-1998
Recommended Motors: C11-5, D12-5, D12-7
Recovery: Parachute
Skill Level: 4
Status: Out-Of-Production
Style: Scale
Weight: 2.29 ounces
Reviews
  • Estes Black Brant II By Casey Thomas Bartlett

    Brief: This is a good, clean, single staged rocket which uses an 18" plastic parachute for recovery. Construction: There is a single body tube, with three fins. The construction is very simple, and the design is very basic. The construction was fairly simple with an overall basic design. The Estes instructions were very thorough, and I was not confused at any point. The ...

  • Estes Black Brant II By Erik Turner

      Brief:   This model is a scale model of a Canadian Atmospheric Research Vehicle. It has a single Estes parachute.   Construction was fairly easy, except for one part. In making the motor mount, I made some mistake (can't remember) and had to rip the mount out. I would suggest being careful in making the mount especially when this model is the first friction fit kit you have ...

Rocksim Design Files
Plans and Instructions

Flights

comment Post a Comment