Custom Rockets - Freedom Kit

CP Method: Rocksim/Rocksim
CP Position From Front: 10.26 inches
Decals: Waterslide
Diameter: 0.95 inches
Fin Material: Balsa
Length: 12.00 inches
Manufacturer: Custom Rockets
Model: 10024
Motor Size: 18 millimeters
Nose Cone Material: Plastic
Power: Low-Power
Product Type: Kit
Recommended Motors: 1/2A6-2, A6-4, A8-3, B4-4, B6-4, C6-5, C6-7
Recovery: Parachute
Skill Level: 1
Status: In-Production
Style: Sport
Weight: 0.80 ounces

Run Motor Simulations

Reviews
  • First time kit gives good experience! By Kirk Greenfield (January 30, 2012)

    Brief This is a Skill Level One rocket with balsa wood fins, a single body tube, and a plastic nose cone. Components The parachute is a 12-inch plastic ‘chute with an elastic shock cord.  The fins are die-cut and were almost ready to fall out, cleanly cut and clear.  There is also a double-sided sheet of instructions. The "anchor" for the shock cord must be cut from the ...

  • Custom Rockets Freedom By Chan Stevens

    This is a sharp-looking red/white/blue rocket by Custom, very good introductory kit, and a great flyer. The kit I built is an older style from about 1995. The main differences between this kit and the current version is that the mylar chute has been replaced by a plastic Estes-style chute, and the nose cone screw eye has been replaced by a hook cast into the nose cone. The rocket consists ...

  • Custom Rockets Freedom By Daniel Kirk

      Basic 4FNC Skill Level 1 rocket. The kit contains: Body Tube BT-50, 9" long Plastic Nose cone Die-cut Balsa Fins 12" poly chute standard 18mm engine mount w/ hook 1/8" x 16" elastic shock cord 1/8" x 1-3/8" launch lug Water-slide decals Quality of materials was uniformly excellent. Instructions and illustrations were clear and straightforward. ...

Rocksim Design Files

Flights

comment Post a Comment