Edmonds Aerospace - Ecee Kit

CP Method: Other
CP Position From Rear: 3.89 inches
Manufacturer: Edmonds Aerospace
Model: ECEE
Product Type: Kit
Recommended Motors: 1/2A3-2T, A3-4T
Recovery: Glide
Skill Level: 1
Style: Glider
Tags: Family:Edmonds Aerospace:Ecee
Reviews
  • Edmonds Aerospace Ecee By Hank Helmen

    Brief: The Edmonds Ecee is a balsa single stage 1/2A sized rocket boosted canard glider that uses variable geometry during recovery glide. Construction: A plastic bag contains all laser cut balsa wood. The particular kit built for review had very lightweight wood. Perhaps too light. More on that later. Included in the kit are nicely laser cut parts, two sheets printed front ...

  • Edmonds Aerospace Ecee By Alan Rognlie

    - by Moira Jean Whitlock Brief description: This is an all balsa wood glider that flies up like a rocket and is recovered when it glides down like an airplane. Pros and cons of construction: The parts are all there, secure within a plastic bag, Nothing was broken or defective. The fuselage of the model is panels of die cut plywood, as are the wings and canard. The motor tube is spiral ...

  • Edmonds Aerospace Ecee By Alan Rognlie

    ( Contributed - by Alan Rognlie)  After my good experience with Edmonds Deltie , I decided to try this model from Rob Edmonds. I ordered it from Apogee Components (along with a second Deltie, a plan set for a Nike Hercules and a couple of his technical reports) and it arrived within 4-5 days. This kit builds to a nice mini-motor (13mm) rocket glider - i.e. no parts are dropped ...

Flights

comment Post a Comment