Estes - Comanche-3 Kit

Decals: Waterslide
Diameter: 0.98 inches
Fin Material: Balsa
Length: 41.00 inches
Manufacturer: Estes
Model: 1382
Product Type: Kit
Production Years: 1982-2012
Recommended Motors: D12-0/C6-0/C6-7, A8-3, B4-4, B6-4, C6-5, D12-0/C6-0/B6-6
Recovery: Streamer
Skill Level: 2
Status: Out-Of-Production
Style: Multi-Stage
Reviews
  • Estes Comanche-3 By Greg Dunham

    Brief: Three stage kit with streamer recovery. Construction Being an altitude junkie this kit caught my eye as soon as I saw it. This kit was typical Estes, that is to say it had all of its parts and well thought out instructions. Quality of the parts was good and they all fit well. I got right to construction and other than wishing I had purchased the fin alignment jig the kit was ...

  • Estes Comanche-3 By Doyle Tatum

    (by Doyle Tatum)  I built this model per instructions with the following exceptions and comments: Steps 1-3 Tied a piece of Kevlar ® to the motor tube and cut it long enough to reach the top of the body tube (placed a swivel on the end) Steps 4-7 no changes Steps 8-11 Used Estes fin alignment tool (EST 2227). When I build another I will use a CA glue to attach the fins and then ...

Rocksim Design Files
Related Videos

Flights

comment Post a Comment