CP Method:	Rocksim/Rocksim
CP Position From Front:	17.04 inches
Diameter:	0.95 inches
Manufacturer:	Apogee Components
Motor Size:	18 millimeters
Power:	Low-Power
Product Type:	Kit
Recommended Motors:	3x1/2A2-2, 3xA2-3, 3xB2-3, 3xB2-5, 3xB2-7, A6-4, A8-3, B4-4, B6-4, C10-4, C10-7, C4-5, C6-3, C6-5, D3-5
Recovery:	Parachute
Style:	Cluster, Payload

Reviews

• Apogee Components Hydra By Moira Jean Whitlock

    This is a three finned egglofter designed for NAR egglofting competitions. Everything arrived undamaged and all the parts were there. The fins are precut balsa. The fins are precut balsa. The body tube is spiral wound paper as is the motor tube and two sets of centering rings.   There is a balsa launch lug offset, as the nose cone is much wider than the body. The launch lug is 1/8 ...

Rocksim Design Files

• Hydra