Semroc - Saki Kit

Decals: Waterslide
Diameter: 1.84 inches
Fin Material: Balsa
Fin Span: 6.80 inches
Length: 9.30 inches
Manufacturer: Semroc
Model: KA-12
Motor Size: 18 millimeters
Nose Cone Material: Balsa
Power: Low-Power
Product Type: Kit
Recommended Motors: A8-3, B6-4, C6-5
Recovery: Parachute
Skill Level: 1
Status: Out-Of-Production
Style: Goonybird, Odd-Roc
Weight: 9.00 ounces

Run Motor Simulations

Reviews
  • Semroc Saki By Bill Eichelberger (September 20, 2021)

    At first glance the Semroc Saki appears to be an Estes Goonybird Cloud Hopper with different paint and decals, but comparing the two side by side tells a different story.  They share the same basic shape, but little else, as the Saki is not only larger than the BT-60 Estes bird, but also 18mm powered compared to the mini-engine Goony.  According to Estes Industries legend, ...

  • Semroc Saki By Daniel Draney (October 6, 2015)

    Great little GoonyBird style kit by Semroc. Components Balsa nose cone, fins, and cockpit. Water slide decals. /h2 No problems building the kit. Finishing Was a little difficult to paint the joint under the wings. Construction Score: 5 Flight Great flights, fin config makes it look cool in the air. Recovery I wish I had put ...

  • Semroc Saki By George Beever (June 1, 2009)

    A single-stage LPR kit, one of the "Groonie" line from SEMROC. Designed to bear a resemblance to the WWII Japanese "Ohka" kamikaze plane. 1 Balsa nose cone, 2 body tubes [one being the motor mount tube], 1 centering ring set, 1 laser-cut balsa fin set, 1 thrust ring, 1 motor hook, 1 Kevlar thread/elastic cord shock cord, clay nose weight, 1 plywood disc, 1 screw eye, 1 12-inch plastic ...

Flights

comment Post a Comment