Custom Rockets Freedom

Custom Rockets - Freedom {Kit} (10024)

Contributed by Chan Stevens

Construction Rating: starstarstarstarstar_border
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar
Diameter: 0.95 inches
Length: 12.00 inches
Manufacturer: Custom Rockets
Skill Level: 1
Style: Sport

Rocket PicBrief:
This is a sharp-looking red/white/blue rocket by Custom, very good introductory kit, and a great flyer.

Construction:
The kit I built is an older style from about 1995. The main differences between this kit and the current version is that the mylar chute has been replaced by a plastic Estes-style chute, and the nose cone screw eye has been replaced by a hook cast into the nose cone.

The rocket consists of a single BT-50 tube, plastic parabolic nose cone, die-cut balsa fins set (4), 18mm motor mount/rings, engine hook, lug, and 12" silver mylar parachute. The balsa fin stock is stiff, and very good quality.

This is a skill level one kit, and as such it's a pretty simple build. The instructions were clear and easy to follow, though not quite as well illustrated as Estes' and Quest's skill level 1 kits. The parts fit very well, and everything was very good quality. Being a bit obsessive/compulsive, I decided to airfoil the fins for peak performance. Even with that effort, total construction time was less than an hour. The only modification I made was the shock cord--I bypassed the paper mount and 1/8" elastic in favor of Kevlar tied to the engine mount, and about 2-1/2 feet of heavier elastic.

Finishing:
The water slide decals, being about 8 years old, were very brittle. I've also built a "fresh" one, and found no problem. For a skill level 1 kit, though, the finish is a bit challenging, requiring three colors and masking. I would normally figure a skill level 1 kit to be no paint or at the worst, single-color. Once painted and decaled, though, this is a great looking rocket. The patriotic theme is very appealing.

Construction Rating: 4 out of 5

Flight:
As expected on an introductory kit, this is a very stable flyer. I flew it running up the ladder starting with A's, finishing with a C6-5. The C6 took it out of my sight range, though I picked it up on the way down and successfully recovered without a problem. It's very quick off the pad, and I'd normally recommend sticking with A/B power unless switching to a streamer recovery.

Recovery:
The mylar chute offers much better performance/resistance to melting than the plastic chutes. It's also easier to pick out in the sky.

Flight Rating: 5 out of 5

Summary:
I've built all of the current Custom kits, plus about 5-6 OOP ones, and this one is my favorite. Nothing fancy about the design, but a solid performer and one with good eye-appeal.

Overall Rating: 5 out of 5

Other Reviews
  • First time kit gives good experience! By Kirk Greenfield (January 30, 2012)

    Brief This is a Skill Level One rocket with balsa wood fins, a single body tube, and a plastic nose cone. Components The parachute is a 12-inch plastic ‘chute with an elastic shock cord.  The fins are die-cut and were almost ready to fall out, cleanly cut and clear.  There is also a double-sided sheet of instructions. The "anchor" for the shock cord must be cut from the ...

  • Custom Rockets Freedom By Daniel Kirk

      Basic 4FNC Skill Level 1 rocket. The kit contains: Body Tube BT-50, 9" long Plastic Nose cone Die-cut Balsa Fins 12" poly chute standard 18mm engine mount w/ hook 1/8" x 16" elastic shock cord 1/8" x 1-3/8" launch lug Water-slide decals Quality of materials was uniformly excellent. Instructions and illustrations were clear and straightforward. ...

Flights

Comments:

avatar
G.S. (September 23, 2002)
I found the construction quite easy until it came to the nose cone which was too small for the body tube. I had to use some masking tape to make a proper fit. The waterslide decals were very thin, not too user-friendly for my nine year old. The maiden flight (on an A8-3) went great up until the shock cord snapped and the 'chute/nose cone landed in a tall tree. A good beginning rocket, but beware the nose cone fit and thin shock cord...

comment Post a Comment