Edmonds Aerospace Deltie

Edmonds Aerospace - Deltie {Kit} (DELTIE)

Contributed by Jack Hydrazine

Construction Rating: starstarstarstarstar
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar
Published: 2015-06-20
Length: 16.50 inches
Manufacturer: Edmonds Aerospace
Skill Level: 1
Style: Glider

Brief

A boost glider using 18mm motors.

Components

All the components were used.  Great laser cutting of the pieces.

Construction

Building was very easy and straight forward.  Because they were laser cut balsa the pieces fit very well together.

Finishing

Did not finish it to keep the weight to a minimum.  Just make sure you balance the glider with the appropriate amount of supplied clay before you fly it.

 

Construction Score: 5

Flight

My first flight was in 2014 using an A8-3 motor.  It did reach a high altitude but at motor ejection the pop pod did separate well and the glider flew very well.

The second flight occurred on 19APR2015 using a B6-2 motor.  This time it flew a bit higher and glider for a longer period of time.  Perfect flight!

Recovery

Recovery of the pop pod was by a short streamer.  I'll paint it fluorescent red before the next flight so it is easier to find.  The glider flew great.

 

Flight Rating: 5

Summary

A great beginner's kit for anyone wanting to try their hand at boost gliders.

 

Overall Rating: 5
Other Reviews
  • Edmonds Aerospace Deltie By Kris Henderson

    Brief: This is a boost glider that literally takes minutes to build and isn't all that expensive. Construction: The kit comes with a body tube for the engine and pop pod recovery device (streamer), three main body pieces, balsa nose cone, and clay for weighting one fin down to enable it to circle around your launch site instead of taking off a couple miles down wind. The ...

  • Edmonds Aerospace Deltie By Paul Gray

    Background The Edmonds Deltie is one of the most popular boost gliders, and with good reason. The glider is well designed, and it has a nice style to it. It can be assembled and ready to fly in a very short period of time. Considering the fact that the glider only weighs around five grams, it is capable of staying in the air for a long time. Construction The glider portion of this ...

  • Edmonds Aerospace Deltie By Alan Rognlie

    ( Contributed - by Alan Rognlie)  I am extremely impressed by this kit. Good materials and excellent laser-cut parts yield a fast-building sport model with very good competition potential.  The glider itself is made up of only eight pieces of 1/16" balsa - wings, elevon, fuselage, tip plates and nose reinforcements. The pieces are almost self-jigging and go together ...

  • Edmonds Aerospace Deltie By Neil Thompson

    ( Contributed - by Neil Thompson) Brief: This is a very nice kit by Edmonds Aerospace. The pop pod comes back on a streamer, and the deltie glides back. Construction: The kit contains: 1 tube and a lot of little balsa parts, all very neatly laser-cut. It was very easy to build, fitted together like a jigsaw puzzle. Everything fits together nicely, and everything ...

Flights

comment Post a Comment