Art Applewhite Rockets Helix (18mm)

Art Applewhite Rockets - Helix (18mm) {Kit}

Contributed by Dick Stafford

Construction Rating: starstarstarstarstar
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar
Manufacturer: Art Applewhite Rockets
Art Applewhite Helix 18mm

Brief:
This is an extremely simple monocopter design that uses a section of 29mm motor tubing as the central hub.

Construction:
The parts list:

  • 3/16" Basswood sheet
  • 29mm tube
  • BT-20 motor mount
  • ¼" dowel
  • ¼" launch lug
Art Applewhite Helix 18mm

This kit requires Elmer's Glue All, and an X-Acto knife with a new #11 blade. It's almost so easy that it could be considered ARF (almost ready to fly). You start by cutting the pre-marked holes from the 29mm tube. The patterns are polygons so this involves multiple straight cuts. These are best accomplished by starting inserting the tip of the blade at one vertex with the cutting surface directed along the line. If you carefully insert the blade the rest of the way, the cut will be made.

The parts are all inserted and fillets are applied inside and out. Because the holes are supposed to be snug, I found it helped to insert a motor in the motor mount when it is installed.

I'd recommend waiting until these fillets at least partially set before proceeding...but I didn't. The wing fits in the end of the tube and needs to be trimmed slightly. The fit should remain snug and internal fillets are again applied. I checked several times as the glue set to ensure the wing was aligned properly and was straight.

Finishing:
Art says to apply two light coats of enamel to protect the kit from moisture. I used Helmsman Spar Urethane as a clearcoat.

Construction Rating: 5 out of 5

Flight:
You form a thrust ring with masking tape and friction fit the motor so it won't fall out. The motor is oriented with its nozzle down. If you put it in backwards, you will win closest to the pad (don't ask). You need a sturdy pad with a short ¼" rod (1" or so). Art provides plans for a suitable monocopter pad in the instructions.

A C6-3 gave this little monocopter a nice ride.

Recovery:
After burn out the model quickly slows and tumbles to the ground.

Flight Rating: 5 out of 5

Summary:
Art's hit another home run with the Helix monocopters. They are simple, elegant, and fly great. It's the easiest way I know to get into monocoptering.

Overall Rating: 5 out of 5

Other Reviews
  • Art Applewhite Rockets Helix (18mm) By Matt Gillard (March 8, 2009)

    Brief: The 18mm Helix is a monocopter from Art Applewhite's new range. I got the kit as part of a set of six rockets Art sent me for placing in EMRR's youth participation contest. I gave 4 of the rockets to members in my club, keeping this one for myself, as I'm really liked the Popsicle stick monocopter that Art gave the plans for on TRF. Construction: The kit comes in a ...

  • Art Applewhite Rockets Helix (18mm) By John Lee (July 25, 2008)

    Brief: The Helix is an innovative and simple monocopter design from Art Applewhite. It is extremely simple to build and goes together quickly. Its also a hoot to fly. This 18mm variant is the largest of the series which can be built "right out of the package". The 18mm Double Helix and above require a small amount of sawing. This one requires only a razor knife for ...

Flights

comment Post a Comment