Quest Area 51 Saucer

Quest - Area 51 Saucer {Kit}

Contributed by Bill Eichelberger

Construction Rating: starstarstarstarstar_border
Flight Rating: starstarstarstarstar
Overall Rating: starstarstarstarstar_border
Published: 2013-08-12
Manufacturer: Quest
Skill Level: 1
Style: RTF, Saucer

Brief

My Quest Area 51 Saucer came as a throw in with a rocketry lot I bought off of Ebay, much of which proved to be cleverly disguised junk. But, I paid more in shipping than I did on the auction.  I initially threw the saucer aside as it was covered with dust and spider webs and missing two of the three landing legs.  After my initial disappointment, I gave the saucer a second look.  The legs were located in the box and I began looking for ways to reattach them, something that turned out to be a lot easier than it initially looked.  In the end, the rocket I had discarded as junk turned out to be the jewel of the Ebay lot.

Components

  • UFO body
  • 3 legs
  • Fugly stickers

Construction

Pros: Ease of reassembly.  Function.  Form.  

Cons: Cheap plastic won't last forever.  The tabs that hold the wire landing legs in place are already breaking off.

Gotchas: None

Finishing

I guess one could paint the UFO as I've seen one that was done in red and looked pretty good, but the native grey works just as well.  I've seen several different sticker sets, but mine just happened to be the ugliest I've seen.  I didn't apply them, so I can't have much of an opinion as to how they go on, but they seem to hold well.  Mine are, (unfortunately,) staying in place.

Construction Score: 4
 

Flight

I tossed this in the box one day last fall when I was supposed to be flying with a friend on his low-level field.  We arrived to find baseball games in full swing despite the wind and cold, so we drove back over to B6-4 Field despite his initial misgivings.  For the first flight I loaded the UFO with an A8-3.

Yeah, you read it right, an A8-3.Embarassed

When I was a kid, the neighbors had a little contraption that let you load a ball into it and step on a pedal to toss the ball straight up about 8 feet.  It was just enough time to get the oversized bat cocked and ready to wallop the ball into the next county.  This flight reminded me a lot of that one, but I'd left the oversized bat at home.  The UFO cleared the rod with some difficulty and flopped to the ground where the ejection charge fired after a second or two.  Lots of smoke and flame, and best of all, I got the whole flight on camera without having to move.

Flight number two was as soon as I could find a C6-3 in my motor stash.  I read that it was possible to hit 600' with the UFO, but that would have had to have been fired from a cannon.  The C6-3 flight left the pad with authority and topped out at maybe 150', certainly short of 200'. Perfect for B6-4 Field, but likely a disappointment to anyone thinking 600'.  Someone mentioned in another review about using a single use Aerotech D, but I think the Hibachi effect would spell the end of this bird.  The little heat generated by my flights is warping things.

Recovery

Landing was as described, rocket turned over soon after burnout, dropped to the ground upside down and landed on the legs.  No dog barf.  No streamer.  No chute.  I could get used to this.

Flight Rating: 5

Summary

Pros: Almost disposable fun.  This will be a big hit when kids are around to watch.  Fairly sturdy landing gear.

Cons: Plastic is brittle and melts easily.

Overall Rating: 4
Other Reviews
  • Quest Area 51 SPEV Saucer By Dick Stafford (March 21, 2009)

    Brief: Although this resembles Quest's original Area-51 saucer , it varies slightly from the original. This is a SPEV (spare parts elimination vehicle) kit based on a crate of saucer tops that Quest found lying around. The bottom section is redesigned since the original parts were missing. Thus, although really simple to build, it is not RTF. It also doesn't have the wire 'legs' and ...

  • Quest Area 51 SPEV Saucer By Hans "Chris" Michielssen (December 23, 2008)

    This is a re-issue of an out of production Quest(ARF) Saucer Odd-Roc. I ordered two sets of these from Quest during their recent 40% off Christmas sale. One saucer kit and three C6-0 engines were part of the combo deal for $9.00. Quite a good price, a fun rocket for a little more than the price of the three engines. As the Quest website explains a supply of saucer tops was found in a ...

  • Quest Area 51 SPEV Saucer By Manuel Mejia, Jr. (December 15, 2008)

    Brief: Back in the fall of 2008, Quest Aerospace found a stack of 10 year old saucer tops for their 1998 vintage fly saucer RTF rocket. The top plates were the only pieces left from the kit. Rather than discarding them, Bill Stine added an 18 mm motor mount tube, a motor block, a plastic straw, and 3 specially cut black fiberboard supports/fins. One section of the fiberboard ...

  • Quest Area 51 Saucer By Nick Esselman

    I purchased the Area 51 Saucer to add to my 18mm U.F.O. comparison article . It is labeled as a Ready-to-Fly model from Quest made from plastic. CONSTRUCTION: The instructions are printed on the front and back of a single 8½ x11 page of paper. They include illustrations for attaching the legs and for flying. Attaching the legs is done by sliding a plastic holder into a slot on ...

  • Quest Area 51 Saucer (RTF) By Chris Taylor Jr.

    This is another complete ready to go rocket with pad etc. . . again pad [stunk] but I got another one of those launchers. About the pad; take an Estes' Pad and make it look like the picture. Okay, now remove the screw in launch rod mount . . . it just sits in there. No secured angle adjustment either. It is by a measly leg swivel that props up one leg like sticking a rock under a leg. Now, ...

Flights

comment Post a Comment