Quest Courier

Quest - Courier {Kit} (2011)

Contributed by Jerry Nishihira

Construction Rating: starstarstarstar_borderstar_border
Flight Rating: starstarstarstarstar_border
Overall Rating: starstarstarstarstar_border
Diameter: 1.31 inches
Length: 20.25 inches
Manufacturer: Quest
Skill Level: 2
Style: Payload

Brief:
I upgraded the motor mount to a 24mm, 1/8" balsa fins, epoxy glue joints, Aerotech 24" rip stop parachute for payload and 18" for booster.

(MODS) Quest Courier

Construction:
The new motor mount is exactly the same design except that I used bigger centering rings and a bigger body tube.

PROs:

  • great idea and flight concepts
  • easy to follow instructions
  • great Kevlar® shock cord mounting system
  • great science kit for the students to try several options in flights and designs.

CONs:

  • factory balsa fins are way too thin and several were cracked on shipment arrival.
  • factory parachutes are flimsy and will burn even with extra wadding.
  • factory launch lug mount is same balsa material--too thin.

Finishing:
No special care or techniques required. I taped off and painted my own color scheme.

Construction Rating: 3 out of 5

Flight:
Recommended motor for the stock kit is the C6-5. I used the D12-5. Flight prep is standard: wadding, proper folding of chutes, and careful packing into body tube.

Flight is awesome! This rocket is meant to be flown on a D or E motor. It went straight up without rolling or weathercocking and cruised to apogee then upon recovery deployment the separations were flawless.

Recovery:
The only thing I would recommend is that you change your parachutes to the more sturdy Aerotech rip stop nylons and use extra wadding because of the bigger recovery charge. You could also convert the booster's parachute to a streamer as it is very light after separation.

Flight Rating: 4 out of 5

Summary:
PROs: great science kit, great idea and fun to try several experiments on payloads, designs, recoveries.

CONs: too thin balsa material, too flimsy parachute and shroud lines, and too heavy (with egg payload) to be flown on a C motor.

Overall Rating: 4 out of 5

Other Reviews
  • Quest Courier By Bill Eichelberger (November 25, 2020)

    Picked up at Hobby Lobby during the Quest clearance "just because."   The Courier would become my first competition egglofter by default.  (It was the only one I had that met the single engine criteria.)  Despite a lack of enthusiasm for the project at first that wound up causing the construction time to be measured with a multi-year calendar, I must admit to a ...

  • Quest Courier By Andy Hobbs

    The Quest Courier kit is a single stage egg-lofter with the egg housing/nose cone as a slip together unit. Overall, a good looking and effective egg-lofting rocket. The kit comes with a 18mm motor mount assembly that's glued into a Quest-T-35 (1.378 diameter) tube, a set of pre-cut fins, and two 14" 'chutes. The 'chutes were pre-cut and very brightly colored. A piece of 18" Kevlar thread ...

Flights

comment Post a Comment