Art Applewhite Rockets Cone Rocket 24mm

Art Applewhite Rockets - Cone Rocket 24mm {Kit}

Contributed by David Urbanek

Construction Rating: starstarstarstarstar_border
Flight Rating: starstarstarstar_borderstar_border
Overall Rating: starstarstarstarstar_border
Manufacturer: Art Applewhite Rockets
Art Applewhite 24mm Cone Rocket

Brief:
It's an unusual cone rocket. No fins, but the nose weight makes it stable. Pre-printed paper cone, so you don't need to paint it. Very simple to prep.

Construction:
You have to be ready and willing to roll cones out of light cardstock. There is also a short piece of nesting body tubes, and some foam board for the base and mid-section bulkhead.

If you're not used to rolling cones, this rocket is going to be frustration personified. On the other hand, rolling cones out of cardstock is a handy skill to have for model rockets. If you're not sure about cone rolling, photocopy the cone patterns onto light card stock and practice.

The double cone used for the nose cone is especially tricky. You have to put in on thin, or you'll get lumps when you roll it, but thin white glue grabs paper very quickly. You pretty much have to do it in one motion. Practice on some photocopied patterns until you're good at it. If I did it again, I might do it as two nested cones to make it easier.

After you do the double-thick nose cone, the rest is a snap.

Finishing:
What finishing? It's already printed. That's one of the cool things about it.

Construction Rating: 4 out of 5

Art Applewhite 24mm Cone Rocket

Flight:
I only got to fly this once. It flew very straight up and reasonably high on a D12-3. The ejection was right at apogee. The rocket tumbles down very safely. Even though I taped the motor in very well, the motor still ejected.

Recovery:
If I were to build another one, I'd put a much longer shock cord on it, and I'd put in a stronger motor retention system. Either the motor mount rebounded and pierced the cone, or the ejected motor flew through the cone. Whatever the case, the cone was seriously damaged and the upper section of the motor mount was badly damaged.

Art Applewhite 24mm Cone Rocket I think with a half motor hook attached to the lower motor tube, and a longer shock cord would definitely improve this rocket.

Flight Rating: 3 out of 5

Summary:
It's a fun rocket. It's unusual and flies very straight. This is the kind of rocket that is perfect for school demonstrations (as long as you figure out how to retain the motor). The variety of preprinted cones keeps it from being boring or repetitive. Do not tackle this rocket if you have an aversion to rolling paper cones, though.

Overall Rating: 4 out of 5

Other Reviews
  • Art Applewhite Rockets Cone Rocket 24mm By Dick Stafford

    I have really been digging Art's saucers and now Art is branching out to other designs. As the name indicates, this rocket is a simple cone that flies on 24mm motors. This seems to be the next logical step after the Delta saucer design, which is sort of a hybrid between a classical saucer and a cone. Materials: Two sheets of cardstock for the shrouds One piece of foamboard for the ...

  • Art Applewhite Rockets Cone Rocket 24mm By Bob Cox

      Diameter: 5.5 inches (14cm) Height: 4.75 inches (12 cm) Weight: 1.3 oz (35 gm) Finish: I built the Mirror Gold version. Other patterns available include Stars and Stripes, Texas Special, Silver, Fluorescent Orange, Fluorescent Yellow, Fluorescent Green, Hot Pink, and plain White. CONSTRUCTION: Parts: All parts are packaged in a heat-sealed clear plastic bag with no ...

  • Art Applewhite Rockets Cone Rocket 24mm By Dave Stout

    Brief: The Art Applewhite Cone rocket is a single stage, cone stabilized rocket. Construction: Art's rockets are amazing. They are comprised of a small number of lightweight parts. This kit comes with a 1/4" foamcore board with printed patterns, a piece of gold mirror cardstock with patterns printed on the back, a piece of plain cardstock with parts printed on it, two nice ...

Flights

comment Post a Comment