Predicta-1 Rocksim Design File

Comments: entered into RockSim by Alan Estenson

Designer: unknown

Download plans_eirp45_predicta_1.rkt

To use the design file above, you need Rocksim which is available from Apogee's website.

CG: 10.3078 inches from front
CP: 14.1026 inches from front
Margin: 3.89 Overstable

Parts Breakdown

• Estes Ogive Nose Cone
• Estes Paper Body Tube (0.9760 in)
• Estes Paper Ring (0.8850 - 0.9500 in)
• Custom Mass Object
• Custom Balsa Freeform Fin Set
• Estes Paper Body Tube (0.9760 in)
• Estes Paper Body Tube (0.7360 in)
• Estes Paper Ring (0.6510 - 0.7100 in)
• Apogee Components Paper Ring (0.7360 - 0.9500 in)
• Apogee Components Paper Ring (0.7360 - 0.9500 in)
• Custom Polyethylene LDPE Streamer (0.0010 in)
• Custom Balsa Freeform Fin Set

What You Can Do

• Submit a File Related to this Rocksim Design File
• Submit a Rocksim Design File to RocketReviews.com

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/estes-predicta-1-plan.html">Estes Predicta-1</a>

Text Link in BB Code (for forum posts)

[url=http://www.rocketreviews.com/estes-predicta-1-plan.html]Estes Predicta-1[/url]

Image Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/estes-predicta-1-plan.html"><img src="http://www.rocketreviews.com/rocksim/5094/square_image.jpg"></a>

Image Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/estes-predicta-1-plan.html]
  [img]http://www.rocketreviews.com/rocksim/5094/square_image.jpg[/img]
 [/url]
[/center]

Thumbnail Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/estes-predicta-1-plan.html"><img src="http://www.rocketreviews.com/rocksim/5094/thumb.jpg"></a>

Thumbnail Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/estes-predicta-1-plan.html]
  [img]http://www.rocketreviews.com/rocksim/5094/thumb.jpg[/img]
 [/url]
[/center]

Select the appropriate above text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.