Skylance Rocksim Design File

Comments: entered into RockSim by Alan Estenson

Designer: unknown

Download plans_eirp46_skylance.rkt

To use the design file above, you need Rocksim which is available from Apogee's website.

CG: 12.5801 inches from front
CP: 19.0056 inches from front
Margin: 4.85 Overstable

Parts Breakdown

• Custom Ogive Nose Cone
• DIY Eye Hook #4 Mass Object
• Estes Paper Body Tube (1.3250 in)
• Custom Balsa Freeform Fin Set
• Estes Paper Body Tube (0.7360 in)
• Estes Paper Ring (0.6510 - 0.7100 in)
• Estes Engine hook Standard size Mass Object
• Estes Paper Ring (1.2160 - 1.2760 in)
• Estes Paper Ring (0.7360 - 1.2830 in)
• Estes Paper Ring (0.7360 - 1.2830 in)
• Custom Mass Object
• Estes Polyethylene LDPE Parachute (12.00 in)
• Estes Paper Launch Lug (0.1250 in)
• Estes Paper Launch Lug (0.1250 in)

What You Can Do

• Submit a File Related to this Rocksim Design File
• Submit a Rocksim Design File to RocketReviews.com

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/estes-skylance-plan.html">Estes Skylance</a>

Text Link in BB Code (for forum posts)

[url=http://www.rocketreviews.com/estes-skylance-plan.html]Estes Skylance[/url]

Image Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/estes-skylance-plan.html"><img src="http://www.rocketreviews.com/rocksim/5099/square_image.jpg"></a>

Image Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/estes-skylance-plan.html]
  [img]http://www.rocketreviews.com/rocksim/5099/square_image.jpg[/img]
 [/url]
[/center]

Thumbnail Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/estes-skylance-plan.html"><img src="http://www.rocketreviews.com/rocksim/5099/thumb.jpg"></a>

Thumbnail Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/estes-skylance-plan.html]
  [img]http://www.rocketreviews.com/rocksim/5099/thumb.jpg[/img]
 [/url]
[/center]

Select the appropriate above text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.