Custom modded Estes Outlander. Original was said to be underpowered and have unstable/unpredictable flight. Since I thought it was an awesomely cool "definitely not 3FNC" design, I went about fixing the said deficiencies. First I started with a 24mm Motor mount so that I can fly this heavyweight on D12s. Next I noticed that the "fins" (lander legs) were designed so that they can actually flop around! Can you imagine a rocket with 4 floppy fins? I fixed that with added "bushing" spacers using balsa shims and I also notched the end stop a bit so that the fins stay in place on lift off. Seems to have worked well since first flight was a very good one. I also added 1oz of clay to the nose since I was flying on Ds.
| Flight Date: | 2021-05-22 |
| Rocket Name: | Estes Outlander (Modded fins & 24mm MMT) |
| Kit Name: | Estes - Outlander {Kit} (2110) [2003-2008] |
| Flyer's Name: | Ken E. Coyote |
| Motors: | E20-4W |
| Expected Altitude: | 600.00 Feet |
| Wind Speed: | 5.00 mph |
| Launch Site: | Pine Island NY (Metra Rocket Club) |
Finally flew this one on an E and it was FANTASTIC! Stunning boost, great event and good enough landing. E20-4W is perfect for this if you have a 24mm mount!
| Stage | Motor(s) |
|---|---|
| 1 | Aerotech E20-4 |
Sponsored Ads
 |
 |