Madcow Rocketry Squat Rocksim Design File

Designer: Mike Stoop Madcow Rocketry

Download Squat.rkt

To use the design file above, you need Rocksim which is available from Apogee's website.

Kit Name: Madcow Rocketry - Squat

CG: 14.2936 inches from front
CP: 21.9631 inches from front
Margin: 1.92

Parts Breakdown

• LOC/Precision Ogive Nose Cone
• Custom Mass Object
• Custom Mass Object
• LOC/Precision Paper Body Tube (4.0000 in)
• Custom Rip stop nylon Parachute (36.00 in)
• Estes Mass Object
• LOC/Precision Paper Body Tube (2.2600 in)
• Custom 1/4 Aircraft Plywood Ring (2.2600 - 3.9000 in)
• Custom 1/4 Aircraft Plywood Ring (2.2600 - 3.9000 in)
• Custom 1/4 Aircraft Plywood Freeform Fin Set

What You Can Do

• Submit a File Related to this Rocksim Design File
• Submit a Rocksim Design File to RocketReviews.com

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/rocksim-madcow-rocketry-squat.html">Madcow Rocketry Squat</a>

Text Link in BB Code (for forum posts)

[url=http://www.rocketreviews.com/rocksim-madcow-rocketry-squat.html]Madcow Rocketry Squat[/url]

Image Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/rocksim-madcow-rocketry-squat.html"><img src="http://www.rocketreviews.com/rocksim/11071/square_image.jpg"></a>

Image Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/rocksim-madcow-rocketry-squat.html]
  [img]http://www.rocketreviews.com/rocksim/11071/square_image.jpg[/img]
 [/url]
[/center]

Thumbnail Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/rocksim-madcow-rocketry-squat.html"><img src="http://www.rocketreviews.com/rocksim/11071/thumb.jpg"></a>

Thumbnail Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/rocksim-madcow-rocketry-squat.html]
  [img]http://www.rocketreviews.com/rocksim/11071/thumb.jpg[/img]
 [/url]
[/center]

Select the appropriate above text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.