BioHazard Rocksim Design File

Comments: Weights and CG as built by GA Dean

Designer: Estes (Based on popular Estes "Big Bertha)

Download mods_ests_baby_bertha_to_3motor_cluster_biohazard.rkt

To use the design file above, you need Rocksim which is available from Apogee's website.

CG: 7.5500 inches from front
CP: 9.9410 inches from front
Margin: 1.46

Parts Breakdown

• Estes Elliptical Nose Cone
• Custom Mass Object
• Estes Paper Body Tube (1.6370 in)
• Custom Balsa Freeform Fin Set
• Estes Polyethylene LDPE Parachute (9.00 in)
• Custom Mass Object
• Estes Paper Launch Lug (0.1250 in)
• Estes Paper Body Tube (0.7360 in)
• Estes Paper Ring (0.6496 - 0.7087 in)
• Estes Paper Body Tube (0.7360 in)
• Estes Paper Ring (0.6496 - 0.7087 in)
• Estes Paper Body Tube (0.7360 in)
• Estes Paper Ring (0.6496 - 0.7087 in)
• Custom Paper Ring (0.7360 - 1.5950 in)

What You Can Do

• Submit a File Related to this Rocksim Design File
• Submit a Rocksim Design File to RocketReviews.com

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-biohazard.html">BioHazard</a>

Text Link in BB Code (for forum posts)

[url=http://www.rocketreviews.com/unknown-biohazard.html]BioHazard[/url]

Image Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-biohazard.html"><img src="http://www.rocketreviews.com/rocksim/27178/square_image.jpg"></a>

Image Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/unknown-biohazard.html]
  [img]http://www.rocketreviews.com/rocksim/27178/square_image.jpg[/img]
 [/url]
[/center]

Thumbnail Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-biohazard.html"><img src="http://www.rocketreviews.com/rocksim/27178/thumb.jpg"></a>

Thumbnail Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/unknown-biohazard.html]
  [img]http://www.rocketreviews.com/rocksim/27178/thumb.jpg[/img]
 [/url]
[/center]

Select the appropriate above text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.