Death Star Rocksim Design File

Contributed by Bob Cox

Comments: Spherical Nose cone. Heavier than Estes catalog says, but sims about right.

Designer: Estes (RockSim by Bob Cox, based on demo by Tim van Milligan)

Download oop_estes_deathstar.rkt

To use the design file above, you need Rocksim which is available from Apogee's website.

CG: 4.6401 inches from front
CP: 12.0865 inches from front
Margin: 1.49

Parts Breakdown

• Custom Elliptical Nose Cone
• Custom Elliptical Transition
• Estes Paper Body Tube (0.9760 in)
• Custom Balsa Trapezoid Fin Set
• Estes Paper Body Tube (0.7360 in)
• Estes Paper Ring (0.6508 - 0.7100 in)
• Estes Polyethylene LDPE Parachute (12.00 in)
• Estes Paper Ring (0.7360 - 0.9500 in)
• Estes Paper Ring (0.7360 - 0.9500 in)
• Custom Polystyrene PS Launch Lug (0.2800 in)
• Custom Polystyrene PS Launch Lug (0.2800 in)

What You Can Do

• Submit a File Related to this Rocksim Design File
• Submit a Rocksim Design File to RocketReviews.com

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-death-star.html">Death Star</a>

Text Link in BB Code (for forum posts)

[url=http://www.rocketreviews.com/unknown-death-star.html]Death Star[/url]

Image Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-death-star.html"><img src="http://www.rocketreviews.com/rocksim/27850/square_image.jpg"></a>

Image Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/unknown-death-star.html]
  [img]http://www.rocketreviews.com/rocksim/27850/square_image.jpg[/img]
 [/url]
[/center]

Thumbnail Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-death-star.html"><img src="http://www.rocketreviews.com/rocksim/27850/thumb.jpg"></a>

Thumbnail Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/unknown-death-star.html]
  [img]http://www.rocketreviews.com/rocksim/27850/thumb.jpg[/img]
 [/url]
[/center]

Select the appropriate above text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.