Ricochet Rocksim Design File

Contributed by Greg Poehlein

Download estes_ricochet.rkt

To use the design file above, you need Rocksim which is available from Apogee's website.

CG: 16.0163 inches from front
CP: 19.0934 inches from front
Margin: 4.18 Overstable

Parts Breakdown

• Estes Ogive Nose Cone
• Estes Paper Body Tube (0.7360 in)
• Balsa Machining Service Conical Transition
• Estes Paper Body Tube (0.9760 in)
• Estes Polyethylene LDPE Parachute (12.00 in)
• Estes Mass Object
• Balsa Machining Service Paper Ring (0.7360 - 0.9460 in)
• Estes Paper Body Tube (0.7360 in)
• Estes Engine hook Standard size Mass Object
• Estes Paper Ring (0.6496 - 0.7087 in)
• Custom Balsa Freeform Fin Set
• Custom Balsa Freeform Fin Set
• Custom Balsa Freeform Fin Set

What You Can Do

• Submit a File Related to this Rocksim Design File
• Submit a Rocksim Design File to RocketReviews.com

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-estes-ricochet.html">Ricochet</a>

Text Link in BB Code (for forum posts)

[url=http://www.rocketreviews.com/unknown-estes-ricochet.html]Ricochet[/url]

Image Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-estes-ricochet.html"><img src="http://www.rocketreviews.com/rocksim/27018/square_image.jpg"></a>

Image Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/unknown-estes-ricochet.html]
  [img]http://www.rocketreviews.com/rocksim/27018/square_image.jpg[/img]
 [/url]
[/center]

Thumbnail Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-estes-ricochet.html"><img src="http://www.rocketreviews.com/rocksim/27018/thumb.jpg"></a>

Thumbnail Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/unknown-estes-ricochet.html]
  [img]http://www.rocketreviews.com/rocksim/27018/thumb.jpg[/img]
 [/url]
[/center]

Select the appropriate above text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.