oop_estes_der_v3.rkt Rocksim Design File

Contributed by Dick Stafford

Download oop_estes_der_v3.rkt

To use the design file above, you need Rocksim which is available from Apogee's website.

CG: 13.1365 inches from front
CP: 18.6232 inches from front
Margin: 2.11

Parts Breakdown

• Estes Ogive Nose Cone
• Estes Paper Body Tube (2.6000 in)
• Estes Paper Ring (0.9760 - 2.5880 in)
• Apogee Components Paper Ring (0.9760 - 2.5880 in)
• Custom Balsa Freeform Fin Set
• Estes Paper Launch Lug (0.1880 in)
• Estes Paper Launch Lug (0.1880 in)
• Estes Polyethylene LDPE Parachute (18.00 in)
• Estes Paper Body Tube (0.9760 in)
• Estes Engine hook Standard size Mass Object
• Apogee Components Paper Ring (0.7400 - 0.9500 in)
• Custom Mass Object

What You Can Do

• Submit a File Related to this Rocksim Design File
• Submit a Rocksim Design File to RocketReviews.com

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-oopestesderv3rkt.html">oop_estes_der_v3.rkt</a>

Text Link in BB Code (for forum posts)

[url=http://www.rocketreviews.com/unknown-oopestesderv3rkt.html]oop_estes_der_v3.rkt[/url]

Image Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-oopestesderv3rkt.html"><img src="http://www.rocketreviews.com/rocksim/27262/square_image.jpg"></a>

Image Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/unknown-oopestesderv3rkt.html]
  [img]http://www.rocketreviews.com/rocksim/27262/square_image.jpg[/img]
 [/url]
[/center]

Thumbnail Link in HTML (for web sites)

<a href="http://www.rocketreviews.com/unknown-oopestesderv3rkt.html"><img src="http://www.rocketreviews.com/rocksim/27262/thumb.jpg"></a>

Thumbnail Link in BB Code (for forum posts)

[center]
 [url=http://www.rocketreviews.com/unknown-oopestesderv3rkt.html]
  [img]http://www.rocketreviews.com/rocksim/27262/thumb.jpg[/img]
 [/url]
[/center]

Select the appropriate above text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.