Estes - Bull Pup 12D Kit
| CP Method: | Rocksim/Rocksim |
| CP Position From Front: | 10.76 inches |
| Decals: | Self-Stick |
| Diameter: | 1.33 inches |
| Fin Material: | Balsa |
| Length: | 15.60 inches |
| Manufacturer: | Estes  |
| Model: | 1270 |
| Motor Size: | 18 millimeters |
| Nose Cone Material: | Plastic |
| Original Price: | $6.49 |
| Plan (JimZ): | http://www.spacemodeling.org/JimZ/est1972.htm |
| Plan (YORP): | http://www.oldrocketplans.com/estes/est1972/est1972.htm |
| Power: | Low-Power |
| Product Type: | Kit |
| Recommended Motors: | A8-3, B4-4, B6-4, C6-5 |
| Recovery: | Parachute |
| Skill Level: | 1 |
| Status: | Out-Of-Production |
| Style: | Scale |
| Weight: | 1.80 ounces |
Reviews
- Estes Bull Pup 12D By Matt Gillard and Chris Fisher (June 30, 2010)
Matt . The bull pup D12 is a sports scale rocket. I had one that I flew often and lost it on a roof. With the 2010 challenge asking for a duel review, I dusted off two kits from the build pile. Chris Fisher and I are both members of Midland Rocketry and meet up once a month. So he and I both built the kit. Chris . First up I must thank Matt for giving me the kit. Of course I know it's just ...
- Estes Bull Pup 12D By Jon Revelle
Brief: This is a sport scale version of the Air Force's Bullpup Missile. A skill level 2 rocket but not that hard. It has been around for quite a bit now. Construction: The kit comes in either a box or a bag (nowadays it comes in a bag) and mine had all of the parts. You get: Nose Cone Body Tube Sheet of balsa Tail Cone Clay Nose Weight Centering Rings ...
- Estes Bull Pup 12D By Frank Ross
( Contributed - by Frank Ross - 11/01/00) Brief: Upsized motor to 24mm. Modifications: The modification is fairly simple. I sanded down the plastic tail cone until the opening was the same as the inner diameter of a BT-50 motor mount tube. I used a BT-50 to BT-55 centering ring for the forward end of the motor mount and epoxied the aft end of the motor mount into the tail cone, being ...
- Estes Bull Pup 12D By Doyle Tatum
(by Doyle Tatum) I purchased this model about 6 months ago and with the upcoming SoAR Birthday celebration launch (the first rocket to fly at a SoAR launch was a Bull Pup) and the discussion of converting to 24mm, on RMR, I decided to assemble the rocket. I assembled the rocket per the instructions with the following additions and exceptions: I cut a 24mm tube and then sanded the ...
- Estes Bull Pup 12D By John Yurcina
Brief This is a very well designed sport scale version of the USAF Bull Pup 12D. You should be able to build this rocket if you have a couple other rockets under your belt. Construction The first thing I noticed was that this model was in a box. Some Estes kits are in flimsy plastic bags, which makes the parts prone to creases and such. I opened up the box, and all the parts were ...
Rocksim Design Files
Plans and Instructions
Thanks to ...
- Steve Lindeman for Updating Product Attributes
 |
 |
Flights
Sponsored Ads
|
|