| 2012-05-16 | John Kelley's Fliskit Tumbleweed | Estes 1/4 A3-3 | - | |
| 2012-04-22 | | 1/4A3-3T | - | Perfect flight, great feather weight recovery. Very high. |
| 2012-04-22 | Jeffrey Gortatowsky's Chute Howdy 13mm | 1/4A3 | - | This is its 3rd flight and the first where the 16 inch dry cleaner plastic chute fully deployed. I... |
2012-04-22  | Jeffrey Gortatowsky's Magpie Version 1.37 | 1/4A3-3T | - | Crowd pleaser. Excellent flight with quite a bit of height. It is light after all. Featherweight... |
| 2012-03-14 | Dean Booth's Estes 220 Swift - motor mount mod (2) | Estes 1/4A3-3T | - | The teflon streamer stripped off during descent, resulting in a quick trip down. I found the... |
| 2012-02-01 | Dean Booth's Estes 220 Swift - motor mount mod (2) | Estes 1/4A3-3T | - | I loaded up a teflon tape streamer and shortened 1/4A motor. Heard a loud pop at ejection. Rear... |
| 2011-12-17 | David Sindel's 3D Printed Rocket | 1/4A3-3 | - | |
| 2011-10-23 | Dean Booth's Estes 220 Swift - motor mount mod (2) | Estes 1/4A3-3T | - | Another flawless flight using the rear-ejection mod. Nice tracking smoke before apogee, recovered... |
| 2011-10-05 | Dean Booth's Estes 220 Swift - motor mount mod (2) | Estes 1/4A3-3T | - | Flawless operation on this maiden flight. I modified the Swift for rear ejection to aid in... |
| 2011-08-20 | Glenn Weiss's Estes Mosquito | 1/4A3-3 | - | Ejected just after apogee with NC turned sideways, shot back down to earth at an angle |
| 2011-07-23 | Glenn Weiss's Estes Mosquito | 1/4A3-3 | - | Recoved rocket and motor pretty close together |
| 2011-05-31 | John Kelley's Fliskit Tumbleweed | Estes 1/4 A3-3 | - | Engine hook caught on close pin stop. burned hole in close pin |
| 2011-05-01 | Jeffrey Gortatowsky's Chute Howdy 13mm | 1/4A3-3T | - | Great boost. Got the 16 inch chute out just fine... but it did not unfurl. It just streamered in... |
| 2011-05-01 | Jeffrey Gortatowsky's Chute Howdy 13mm | 1/4A3-3T | - |
Thought I would try again... tried packing the chute a bit differently... not a good idea. Great... |
| 2011-04-30 | Hans "Chris" Michielssen's Odd'l Rockets Cyclone | 1/4A3-2 | 250 feet | Perfect whistling boost and separation at ejection. Upper monocopter drifted to edge of field.... |
| 2011-01-23 | Jeffrey Gortatowsky's Zoomie | 1/4A3-3T | - | Boosted pretty well on a 1/4A3-3. Glide was pretty steep and straight ahead. Flew for about 10... |
| 2010-12-29 | Brian Hoover's Estes Bandito | 1/4A3-3 | - | |
| 2010-12-29 | Brian Hoover's Estes Firehawk | 1/4A3-3 | - | |
| 2010-12-26 | Brian Hoover's 13mm Whirlygig | 1/4A3-3 | - | |
| 2010-12-26 | Brian Hoover's Estes Firehawk | 1/4A3-3 | - | Angled rod into wind, bad idea - not enough altitude ejected just prior to impact |
| 2010-12-26 | Brian Hoover's Estes Bandito | 1/4A3-3 | - | |
| 2010-12-26 | Brian Hoover's 13mm Whirlygig | 1/4A3-3 | - | |
| 2010-12-11 | Moe Bertrand's Estes Birdie | 1/4A3-3 | - | Another fine flight of my little Birdie |
| 2010-11-06 | Brian Hoover's Estes Firehawk | 1/4A3-3 | - | weak boost - poor motor |
| 2010-11-06 | Brian Hoover's Estes Bandito | 1/4A3-3 | - | |
| 2010-10-23 | Glenn Weiss's Estes Mosquito | 1/4A3-3 | - | Despite having flown it earlier in the launch my son wanted to fly it again today, so up it went... |
| 2010-10-23 | Glenn Weiss's Estes Mosquito | 1/4A3-3 | - | Nominal flight |
| 2010-10-17 | Brian Hoover's Estes X-Ray | 1/4A3-3 | - | too small for cargo. need 1/2a for these minimum. cargo pod came apart again. |
| 2010-10-17 | Brian Hoover's Estes Firehawk | 1/4A3-3 | - | ok, low flight |
| 2010-10-17 | Brian Hoover's Estes Firestreak SST | 1/4A3-3 | - | too small motor for this model, very low and ejected on ground. |
| 2010-10-17 | Brian Hoover's Estes Bandito | 1/4A3-3 | - | ok flight, low |
| 2010-09-19 | Brian Hoover's Estes Bandito | 1/4A3-3 | - | Great small field and little kid launch. delay was long but only option at the 1/4a power level... |
| 2010-09-19 | Brian Hoover's Estes Firehawk | 1/4A3-3 | - | Great for small fields and little kids. My 3 yr old loves to launch and retrieve this one as it... |
| 2010-09-18 | Bernard Cawley's FlisKits Cougar 660 | 1/4A3-3 | 60 feet | Kinda dicey with late deployment. Landed very near the LSO table. Popped one fin and big nosecone... |
| 2010-09-11 | Brian Hoover's Estes Bandito | 1/4A3-4 | - | Much better delay this flight, might have just gotten a motor that went long last time. clean... |
| 2010-09-11 | Brian Hoover's Estes Firehawk | 1/4A3-3 | - | Nice flight, slight drift on descent, some singing on chute. |
| 2010-09-11 | Brian Hoover's Estes Firehawk | 1/4A3-3 | - | Good flight, landed within 3 feet of launchpad! |
| 2010-09-09 | Brian Hoover's Estes Firehawk | 1/4A3-3 | - | Good flight, seems to do better than the Bandito on the 1/4A motors. no damage. |
| 2010-09-09 | Brian Hoover's Estes Bandito | 1/4A3-3 | - | Good boost, long delay. OK flight, could really use shorter delay. |
| 2010-08-03 | Jeff Lane's MPC Delta-Katt | 1/4A3-2 | - | Pod separation on boost. Only happened once before, here it is again. At NARAM. |
| 2010-08-03 | Jeff Lane's MPC Delta-Katt | 1/4A3-2 | - | Two pod separations in a row. Wow. |
| 2010-08-02 | Jim Bassham's Edmonds Aerospace Micro Ivee | 1/4A3-4 | - | 1/4 A Boost glider contest. First flight of the day @ 40 seconds. Check in guy at the recovery... |
| 2010-08-02 | Jim Bassham's Edmonds Aerospace Micro Ivee | 1/4A3-4 | - | Second flight - 38 seconds. Trip Barber was LCO and I was in the same round as Chad Ring. 5th... |
| 2010-07-13 | Dean Booth's Estes 220 Swift - LOST (1) | 1/4A3-3 | - | Vanished again at apogee. I searched the ground in vain. I'll convert my next one to MMX. |
| 2010-07-06 | Dean Booth's Estes 220 Swift - LOST (1) | 1/4A3-3 | - | At apogee, the smoking motor casing flew off in one direction and the rocket simply vanished. I... |
| 2010-06-30 | Dean Booth's Estes Gnome - RETIRED (1) | 1/4A3-3 | - | My 1st BAR launch (after some 35 years)! I used the 1/4A just to shake down the rocket and launch... |
| 2010-06-29 | Hans "Chris" Michielssen's Carded Downscale Cherokee T 13mm | 1/4A3-2 | - | Carded downscale from plans by Greg Poehlein. Flew on a 35 yead old 1/4A3-2T engine and ignitor.... |
| 2010-06-05 | Jeff Lane's MPC Delta-Katt | 1/4A3-3 | - | NAR's electrical system for NARAM failed, had to launch with Estes Porta-Pad electrics. Fairly... |
| 2010-06-05 | Jeff Lane's MPC Delta-Katt | 1/4A3-3 | - | 3/4 scale Katt. Trimmed more stall and less right turn, good boost, good separation, 25 seconds or... |
| 2010-05-16 | Bernard Cawley's Alpha II HD | 1/4A3-3 | - | Embarassing flight attempt. Up about 30 feet, then lawn dart behind pad with ejection after it was... |
| 2010-05-16 | Mark Kulka's Aerospace Speciality Products Streamer Duration (13mm) | 1/4A3-3 | - | 1/4A SDMR 1st flight - multi-round. (SEP) |
| 2010-05-16 | Mark Kulka's Aerospace Speciality Products Streamer Duration (13mm) | 1/4A3-3 | - | 1/4A SDMR 2nd flight. (SEP) |
| 2010-05-16 | Mark Kulka's Estes Hornet Mini-Brute (Clone) | 1/4A3-3 | - | 1/4A SDMR 3rd flight. Qualified! |
| 2010-05-14 | Ron Lemke's FlisKits Whatchamacallit | 1/4A3-3 | 89 feet | Clinometer used for altitude, baseline 200 feet. |
| 2010-05-14 | Ron Lemke's FlisKits Whatchamacallit | 1/4A3-3 | 80 feet | Clinometer used for altitude, baseline 200 feet. |
| 2010-04-17 | Moe Bertrand's Phoenix Aerospace - 1/4A-EZ | 1/4A3-3 | - | PRM-23 1/4A Boost Glide Event. Just 22.5 seconds aloft for the first go. |
| 2010-04-17 | Moe Bertrand's Phoenix Aerospace - 1/4A-EZ | 1/4A3-3 | - | PRM-23 1/4A Boost Glide Event. Just 25.6 seconds aloft for the second go. |
| 2010-04-17 | Moe Bertrand's Phoenix Aerospace - 1/4A-EZ | 1/4A3-3 | - | Sport flight of the 1/4A-EZ. 19.5 seconds aloft. |
| 2010-04-17 | Jeff Lane's MPC Delta-Katt | 1/4A3-3 | - | Stuck on rod, got half altitude, lawn dart just as ejection activated, no damage. |
| 2010-04-17 | Jeff Lane's MPC Delta-Katt | 1/4A3-3 | - | Got tangled in shock cord, came apart about 30 feet up, got an actual glide. 12 second flight wins... |
| 2010-04-03 | Jim Bassham's Estes Gnome | 1/4A3-4 | - | 1/2 A streamer attempt. 12 second flight. |
| 2010-03-21 | Matt Gillard's Estes Mosquito | 1/4A3-3 | - | Even on a 1/4A it shifts, saw an ejection puff of smoke, and then the recovery team found it 5... |
| 2010-03-20 | Glenn Weiss's Estes Mosquito | 1/4A3-3 | - | Spectator mentioned this sounds like a bottle rocket when the motor kicks! Landed fairly close to... |
| 2010-03-20 | Moe Bertrand's Phoenix Aerospace - 1/4A-EZ | 1/4A3-3 | - | PRM-22 1/4A-Boost Glide Event. Nice first flight of this little boost glider...pretty impressive... |
| 2010-03-20 | Moe Bertrand's Phoenix Aerospace - 1/4A-Baby Bird | 1/4A3-3 | - | Decent first flight of this little boost glider...not as good a performer as the 1/4A-EZ. 18.8... |
| 2010-03-20 | Moe Bertrand's Phoenix Aerospace - 1/4A-EZ | 1/4A3-3 | - | PRM-22 1/4A-Boost Glide Event. 22 seconds glide time. |
| 2010-03-20 | Moe Bertrand's Phoenix Aerospace - 1/4A-EZ | 1/4A3-3 | - | PRM-22 1/4A-Boost Glide Event. 39.85 seconds glide time. |
| 2009-12-06 | Team Tracy's FlisKits Nebula | 1/4A3-3 | - | The flight was unstable. I think it was underpowered. We'll try a larger motor next time. |
| 2009-10-17 | Jeff Lane's MPC Delta-Katt | 1/4A3-3 | - | Straight up boost, nice glide, with one of the oddest things I've ever seen... as it nosed into... |
| 2009-10-17 | Jeff Lane's MPC Delta-Katt | 1/4A3-3 | - | Straight up boost, nice glide, second flight, no rolls this time. 28 seconds. |
| 2009-10-16 | Jeff Lane's MPC Delta-Katt | 1/4A3-3 | - | Perfectly straight up. First flight of a new build. Used Blacksky BT5 tubing and a 3/4 scale Delta... |
| 2009-10-16 | Jeff Lane's MPC Delta-Katt | 1/4A3-3 | - | Perfectly straight up boost. 2nd flight of the new 3/4 scale Katt. Added a little weight to the... |
| 2009-10-16 | Jeff Lane's MPC Delta-Katt | 1/4A3-3 | - | Again, perfect straight up boost. Added some epoxy to the fillet and surface of the lower right... |
| 2009-10-16 | Jeff Lane's MPC Delta-Katt | 1/4A3-3 | - | Perfect boost. Added little clay to the fillet of the l. l. wing tip to turn back to center and... |
| 2009-10-13 | Jeff Lane's Jeff Vincent 1/4A Boost Glider | 1/4A3-3 | - | Build the Jeff Vincent 1/4A glider from NAR contest plans. First flight arced over into the ground... |
| 2009-10-13 | Jeff Lane's Jeff Vincent 1/4A Boost Glider | 1/4A3-3 | - | After surgery to re-aim the power pod by shimming the front of the pod/glider joint surface and... |
| 2009-10-13 | Jeff Lane's Jeff Vincent 1/4A Boost Glider | 1/4A3-3 | - | After adjusting pod aim and fastening it with masking tape, it still arced over dramatically,... |
| 2009-10-04 | Team Tracy's Estes Quark | 1/4A3-3 | - | 3rd flight. Added 4 in. of streamer made from wadding and tied 1 in. from nose cone to try to stop... |
| 2009-09-13 | Team Tracy's Estes Quark | 1/4A3-3 | - | 2nd flight. Nose cone separated, but rocket still lawn darted in, even thought there was now 18in... |
| 2009-09-13 | Team Tracy's Estes Quark | 1/4A3-3 | - | Modified with a blow nose cone by adding engine block and then epoxying 18in Kevlar to the engine... |
| 2009-07-19 | John Lee's Blue Maggie | 1/4A3-3 | - | Good demo flight for vacation Bible School |
| 2009-07-19 | John Lee's Edmonds Aerospace Tinee | 1/4A3-3 | - | Got all of about 15 feet up and then spit the motor. All I can figure is that it thought it was a... |
| 2009-07-12 | Kathy Miller's Red Saucer | 1/4A3-3 | - | |
| 2009-06-20 | David Sindel's Estes Mosquito | 1/4A3-3 | - | The poor little guy got hurt bad on the landing of a drag race, but it has been repaired and will... |
| 2009-06-13 | John Lee's HotRod Rockets Fruit Fly | 1/4A3-3 | - | Good flight after repair |
| 2009-05-31 | Jason Orosco's Estes Screamer | 1/4A3-3 | - | Good flight landed about 10 feet from pad. |
| 2009-05-31 | Jason Orosco's Estes Mosquito | 1/4A3-3 | - | Nice flight. |
| 2009-05-31 | Jason Orosco's Estes Quark | 1/4A3-3 | - | Nice flight followed all the way down. |
| 2009-03-21 | John Lee's HotRod Rockets Fruit Fly | 1/4A3-3 | - | Nice, low maiden flight. Ejection charge broke the shock cord but all pieces recovered. |
| 2009-03-16 | Mark Grisco's Estes Mosquito | 1/4A3-3 | - | 1/4 a is enough. |
| 2009-03-13 | John Lee's Quarter A | 1/4A3-3 | - | Exhibition flight for kids at museum |
| 2009-03-03 | Mark Grisco's Semroc Thunderbee | 1/4A3-3 | - | zips off the pad even on a 1/4 A. |
| 2009-03-03 | Mark Grisco's Semroc Thunderbee | 1/4A3-3 | - | hung up on pad so a low flight. |
| 2009-02-15 | David Braatz's Estes Mosquito | 1/4A3-3 | - | Left the pad like a bullet. We launched it at dusk so when the ejection charge blew, it looked... |
| 2009-02-14 | John Lee's Custom Rockets ATW - Anti-Tank Weapon | 1/4A3-3 | - | I used a 13mm adapter. It was way under powered and ejected on the ground. No damage |
| 2008-12-06 | Hank Helmen's Estes Firestreak SST | 1/4A3-4 | 79 feet | Good boost. Good ejection , streamer no good. Hard landing on tarmac. NO substantial damage. |
| 2008-11-22 | Todd Mullin's 1/4A PD | 1/4A3-3 | - | 'Chute choked in tube. Good tumble recovery. |
| 2008-11-22 | Todd Mullin's 1/4A PD | 1/4A3-3 | - | Melted the 'chute. Good tumble recovery. |
| 2008-11-22 | Todd Mullin's 1/4A PD | 1/4A3-3 | - | Melted 'chute. Crunched paper shroud body tube. |
| 2008-11-08 | John Lee's Estes Micron | 1/4A3-3 | - | Maiden Flight. It launched perfectly. I lost sight of it on the way down. I didn't find it until... |
