bannerbanner
 Vintage Estes Rockets      Aerotech Astrobee D      Latest Reviews      Aerotech G-Force
Motors >>

Estes A10T

  • Manufacturer: Estes
  • Designation: A10T
  • Short Name: A10
  • Motor Type: single-use
  • Delays: 3,100 seconds
  • Diameter: 13.0000 mm
  • Length: 45.0000 mm
  • Propellant Weight: 3.8000 g
  • Total Weight: 5.2500 g
  • Average Thrust: 2.3500 N
  • Peak Thrust: 12.6400 N
  • Total Impulse: 1.9980 Ns
  • Thrust Duration: 0.8500 s

Flight Log

DateRocket NameMotor(s)AltitudeNotes
2018-07-21Eric Truax's Green GooberA10-3- Flew on the 18mm conversionto 13mm.-WOW! OK! A 3ft long shock cord and streamer did the trick!...
2012-05-19John Bergsmith's Mini Red MaxEstes A10-3T-
2012-05-15Dean Booth's Estes Alpha IIIEstes A10-3T- Nice flight, good chute deployment. Used 13mm split adapter.
2012-05-06 Rich DeAngelis's BetaA10-0+A3-4157 feet A10-0T booster, A3-4T sustainer: 157’ This classic rocket was on a first-time mission to...
2012-05-02 Hans "Chris" Michielssen's Dr. Zooch Explorer I Jupiter CEstes A10-3t250' est. feet For a small field the A10 seemed to be a good match. Altitude was an estimated 250'. Full...
2012-05-02 Hans "Chris" Michielssen's Odd'l Rockets UP! Cup 13mmEstes A10-3t150' est. feet Perfect flight. It just takes an extra moment or two to connect the clips to the igniter under the...
2012-05-02 Hans "Chris" Michielssen's JavelinEstes A10-3t425 feet High and fast for an A engine. Used a 13mm A10-3t in a engine casing adapter. Plenty of drift...
2012-04-22 Jeffrey Gortatowsky's ArrowheadA10-3T- Great flight. Very high and a good 9" chute recovery
2012-04-21E. Kociba's Birdie Rocket / Badminton shuttlecockEstes a10-3t150 feet Still the best engine for this build. Used it to test the wind and still impress the cubs. A...
2012-04-14Mark Kulka's Gold Scimitar (13mm)A10-P- Nominal flight of very dependable design,
2012-04-14E. Kociba's Birdie Rocket / Badminton shuttlecockEstes a10-3t- Goes up nicely! The rocket seems to be a classic battle between thrust and drag. Guessing 150...
2012-04-14E. Kociba's Birdie Rocket / Badminton shuttlecockEstes a10-pt- Similar flight but kept a plugged engine. The recovery was the same, just no eject. Had to use...
2012-04-01 Hans "Chris" Michielssen's Dr. Zooch Ares 1Estes A10-3t- This is one of the few Dr. Zooch kits I would even consider flying with an A engine. The Stick had...
2012-04-01 Rich DeAngelis's EAC ViperA10-3146 feet First flight of the day. Weather was cool, cloudy and a bit breezy. The Viper flies well in winds,...
2012-03-14Dean Booth's Estes Mini MaxEstes A10-3T- Routine, although the MM didn't seem to gain the altitude I normally see. This little rocket is...
2012-03-03 Hans "Chris" Michielssen's Semroc CenturionA10-0/B6-435 feet I used the ST-16 Booster unit from Semroc for the first time. At separation it was vertical. It...
2012-02-29 Hans "Chris" Michielssen's Centuri Nomad CloneEstes A10-3t250' est. feet Straight flight with full parachute. No damage at recovery.
2012-02-25 Joseph Olexa's Semroc Astrobee 350A10-3- Good flight with soft landing. Used Ested adapeter to use an A10-3T instead of A8-3. Seemed to...
2012-02-04 Hans "Chris" Michielssen's Athena UFOA10-375 feet Labored boost, turn over and ejection. Landed on spring antenna feet.
2012-02-04 Jeffrey Gortatowsky's ArrowheadA10-3T- Excellent flight and good recovery
2012-02-01Dean Booth's Estes Mini MaxEstes A10-3T- First of eight flights today. Nice flight and close recovery with minimal breeze.
2012-02-01Dean Booth's Estes Alpha IIIEstes A10-3T- Last of 8 flights for the day. Just a nice chute recovery on an A10-3 with adaptor.
2012-01-21 Hans "Chris" Michielssen's Art Applewhite Popsicle Stick Monocopter 13mmA10-365 feet Noisy at boost, spinning in after ejection.
2012-01-13 Hans "Chris" Michielssen's Triple Threat Athena SaucerA10-3t50 feet Much higher flight than the MMX saucers flown previously this morning. Used the A10-3t engine but...
2012-01-13 Hans "Chris" Michielssen's Triple Threat Persephone SaucerA10-3- Best flight of the smaller saucers launched this morning. Three fins, three antenna and a round...
2012-01-07Joe Vanlandingham's SixA10-3400 feet Great flight, nice streamer recovery
2011-12-25 Hans "Chris" Michielssen's Centuri Nomad CloneEstes A10-3t- My clone of the Centuri Nomad didn't get an altitude worth writing about with a 13mm A10-3t...
2011-12-18Bob Bernatchez's Estes Beta CloneA10-0/A3-6- Deployed right at apogee
2011-12-18Dean Booth's Estes Mini MaxA10-3- I use the empty playground area to launch, since some RC guys were using the soccer fields. A...
2011-12-10Chan Stevens's Odd'l Rockets SputnikA10-3-
2011-12-03 Hans "Chris" Michielssen's Carded Downscale Orbital Transport 13mmEstes A10-3t300' est. feet After a good straight boost, the orbiter didn't have much of a glide. Streamer recovery on the...
2011-11-25Rich DeAngelis's EAC ViperA10-3155 feet Another good flight of the Estes EAC Viper with an Iris payload and an Altimeter 2 on board....
2011-11-20Glen's Star TrooperA10-3T-
2011-11-10 Hans "Chris" Michielssen's Raisin' MaizeEstes A10-3t225' est. feet Good flight with 6" parachute deployed.
2011-10-25 Hans "Chris" Michielssen's Odd'l Rockets UP! Cup 13mmEstes A10-3t- Good test for the system and first launch of the day.
2011-10-25Hans "Chris" Michielssen's Bullpup 12DEstes A10-3t100 feet Used a 13mm engine and a 18mm casing as an adapter. Low altitude with all the clay nose cweight....
2011-10-16Glen's Star TrooperA10-3T-
2011-10-16Glen's Hi FlierA10-3T-
2011-10-11 Hans "Chris" Michielssen's Semroc AstronEstes A10-3t350' est. feet A 13mm A3-4t was friction fitted into an empty 18mm casing. For some reason, this Semroc blue and...
2011-10-08Rich DeAngelis's Aero-HiA10-3260 feet Beautiful day, the kind pilots describe as "severe clear". Very light winds. Since I usually like...
2011-10-01 Hans "Chris" Michielssen's Carded Downscale A-20 Demon 13mmEstes A10-3t450' est. feet This model is pretty beaten up, time to print up another, salvage the nose cone and rebuild.
2011-10-01 Hans "Chris" Michielssen's Raisin' MaizeEstes A10-3t300' est. feet At ejection, the styrofoam nose cap hit the body hard, it'll need touchup with a red felt tip pen....
2011-09-26Matt Gillard's Edmonds Aerospace TineeA10-3- short glide
2011-09-25Glen's Mini MaxA10-3T-
2011-09-25 Chris Guidry's Estes GouchitoA10-3T5 feet CATO - 2nd CATO of this engine batch (Reported)
2011-09-22 Hans "Chris" Michielssen's Semroc AstronEstes A10-3t400' est. feet Good boost. I put a 13mm T engine in a 18mm engine casing. Big Estes smiley dent in the nose cone.
2011-09-21Dean Booth's Estes Mini MaxA10-3- A nice launch with my old reliable Mini Max. Launched with my son today.
2011-09-17 Hans "Chris" Michielssen's Raisin' MaizeEstes A10-3t200 est. feet Good boost, small parachute was slow to unfurl. No damage.
2011-09-17Dave B's Sky DartA10-3T950' Est. feet Nice first launch
2011-09-17Dave B's Sky DartA10-3T950' Est. feet Nice take off. Rocket suffered a catastrophic event at apogee. The only recovered parts were the...
2011-09-15 Hans "Chris" Michielssen's Raisin' MaizeEstes A10-3t- This was a test launch before flying it at the next Tampa TTRA launch. It got better altitude than...
2011-09-10 Hans "Chris" Michielssen's Carded ScampEstes A10-3t250' est. feet Used a 13mm A10-3t engine in a 18mm casing.
2011-09-10Edward Chess's Art Applewhite Rockets Scimitar 13mmA10-P- noise rocket for such a small paper cube
2011-09-10 Chris J Taylor's QuarkA10-3T- First flight for this tiny rocket. real straight and real high...nobody saw it after smoke trail...
2011-08-29 Hans "Chris" Michielssen's Semroc AstronEstes A10-3t- The ASTRON flew to 300' with an Estes A10-3t engine friction fitted into a used 18mm casing....
2011-08-20Glenn Weiss's Estes X-Prize Lucky SevenA10-3- Put it too far up the rod after previous attempt got stuck, flew in a corkscrew to about 35 ft,...
2011-08-18 Hans "Chris" Michielssen's Art Applewhite Popsicle Stick Monocopter 13mmEstes A10-3t75' feet Loud "whir" with fast spin.
2011-08-17Dean Booth's Estes Mini MaxA10-3- Straight up despite the gentle breeze. A pretty flight.
2011-08-13Dick Stafford's Give 'Em The FingerA10-P- Boink!
2011-08-13Peter Davidson's BlueyA10-3T- Nice easy flight, minor damage to motor tube due to ejection charge
2011-08-13Peter Davidson's RedA10-3T- Hilarious flight with a friction-fitted A10-3T, no damage upon recovery
2011-08-07Dick Stafford's Mini V2A10-3-
2011-08-07Dick Stafford's Estes Mini Marz LanderA10-3-
2011-08-07Dick Stafford's Estes Skinny MiniA10-3-
2011-08-07Dick Stafford's Estes Mini-PatriotA10-3- Landed on VC roof, lost 2 fins.
2011-08-07Dick Stafford's Cognis Aerospace - Eenie MeanieA10-3- Lost the nose cone
2011-08-07Dick Stafford's Paper Kit - Little Joe IA10-3-
2011-08-07Dick Stafford's Art Applewhite Delta Saucer 13mmA10-P-
2011-08-07Dick Stafford's Odd'l Rockets BirdieA10-P-
2011-08-07 Rich DeAngelis's BetaA10/1/2A3435 feet Perfect flight and recovery. Apogee's 4' shiny red mylar streamer is good for this model. Since I...
2011-08-06James Weaver's Drawer PullA10-3T- Flew high, fast, and straight.
2011-08-06James Weaver's Heavenly Hobbies Stratos-13 ELMA10-3T- I neglected to check the piston. It spat the motor and tried to lawn dart. Two inches of body...
2011-08-05 Chris J Taylor's 220 SwiftA10-3T- Incredible velocity!!! Once it fired it was out of sight after smoke trail quit. Found it about...
2011-08-05 Chris J Taylor's Mini MaxA10-3T- Great little rocket flown over 10 times, cracked a fin on second launch rough landing on pavement....
2011-07-26 Hans "Chris" Michielssen's FinlessEstes A10-3t175 feet I used a 13mm A10-3t with an adapter for the first flight. Not a big altitude, but it's very...
2011-07-20 Tyler Runyon's Mini MaxA10-3T264 feet Straight up with a little bit of rolling. Drifted a little, at least away from trees.
2011-07-18 Hans "Chris" Michielssen's Odd'l Rockets UP! Cup 13mmEstes A10-3t- A little louder engine thrust amplified by the cup.
2011-07-15Dean Booth's Estes Alpha IIIA10-3- My A3 works really well to test the wind with an A10-3 and 12 inch chute. This evening - calm on...
2011-07-10Glen's Mini MaxA10-3T-
2011-07-10Glen's Mini MaxA10-3T-
2011-07-06 Hans "Chris" Michielssen's Quest Flics 13mm ConversionEstes A10-3t650' est. feet After drifting under the streamer, it landed on the basketball court surface hard. One fin was...
2011-07-03Rich DeAngelis's BetaA10-0+A3-4714 feet Used an A10-0T booster and A3-4T sustainer. Beautiful flight, sailed out of sight for a long...
2011-07-02Rich DeAngelis's BetaA10-0+A3-4700 feet First test with an altimeter payload. Luckily, I caught my mistake when I put the upper-stage...
2011-06-30Dean Booth's Estes Alpha IIIA10-3- I used an A10-3 and one of my newly-built clipless motor mount adapters - design from Apogee's...
2011-06-28 Hans "Chris" Michielssen's Odd'l Rockets UP! Cup 13mmEstes A10-3t- Loud, wiggler. Aerobrake recovery.
2011-06-25Ray "AcroRay" Miller's VampireA10-3T40 feet Low flight, and the bird came in fast and hard with its original 'chute. This was actually about...
2011-06-24 Hans "Chris" Michielssen's Cork ScrewEstes A10-3t375' est. feet Good wiggling flight, popped the engine at ejection but still ejected the streamer.
2011-06-19Bob Bernatchez's Baby BomarcA10-3T- Parachute did not deploy. Got jammed up at the top of the tube. Tube seems to have delaminated. ...
2011-06-15Matt Gillard's Edmonds Aerospace TineeA10-3- Flew into a tree - it's still there.
2011-06-15Matt Gillard's Estes BirdieA10-3- good flight
2011-06-11C Graski's Sky DartA10-3T910 feet
2011-06-11C Graski's Sky DartA10-3T800 feet
2011-06-08Chris Gonnerman's Semroc MarkA10-3- Flight was much higher than expected. Lost sight of rocket against a cloudy sky, but it was...
2011-06-08Chris Gonnerman's Applewhite 13mm SixA10-3- This was the first flight for this rocket. It tailwagged all the way up, which makes me think it...
2011-06-08Chris Gonnerman's Lo FlierA10-3- Drifted a lot farther than I would have expected, and landed in the neighbor's yard... just...
2011-06-08Dean Booth's Estes Mini MaxA10-3- The combination of the wind and the 6 inch chute meant quite a long drift from the launch pad. ...
2011-06-06 Hans "Chris" Michielssen's Quest Flics 13mm ConversionEstes A10-3t- Good flight, bent fin on landing. A Scotch tape repair.
2011-06-01Dean Booth's Estes Mini MaxA10-3- First flight after some much needed maintenance on the Mini - dents filled in NC, longer shock...
2011-05-28C Graski's Sky DartA10-3T1000 feet This one went so high I thought I would lose the rocket, but careful scanning with a telephoto...
2011-05-18 Hans "Chris" Michielssen's Lil' Red FezEstes A10-3t- A little coning at boost, but stable. It landed nose down in the wet grass. Water stained, I...

Related Videos

Estes 2 stage Solar Flare rocket- Estes 2 stage Solar Flare model rocket flying on B6-0 and A10-3T. Half speed and stills at the end...

What You Can Do