Construction Rating: | starstarstarstarstar |
Flight Rating: | starstarstarstarstar_border |
Overall Rating: | starstarstarstarstar_border |
Manufacturer: | Art Applewhite Rockets |
Brief:
This is an extremely simple monocopter design that uses a section of 24mm motor tubing as the central hub. Its
construction is identical to its bigger 18mm cousin. As a result, much of this review is cut-and-pasted. New/different
material is thus in bold.
Construction:
The parts list:
This kit requires Elmer's Glue All, and an X-Acto knife with a new #11 blade. It's almost so easy that it could be considered ARF (almost ready to fly). You start by cutting the pre-marked holes from the 24mm tube. The patterns are polygons so this involves multiple straight cuts. These are best accomplished by starting inserting the tip of the blade at one vertex with the cutting surface directed along the line. If you carefully insert the blade the rest of the way, the cut will be made. The tube is flexible so be careful that you don't crimp it or cut yourself.
The parts are all inserted and fillets are applied inside and out. Because the holes are supposed to be snug, I found it helped to insert a motor in the motor mount when it is inserted.
I'd recommend waiting until these fillets to at least partially set before proceeding...but I didn't. The wing fits in the end of the tube and needs to be trimmed slightly. The fit should remain snug and internal fillets are again applied. I checked several times as the glue set to ensure the wing was aligned properly and was straight.
Finishing:
Art says to apply two light coats of enamel to protect the kit from moisture. I used Helmsman Spar Urethane as a
clearcoat.
Construction Rating: 5 out of 5
Flight:
You form a thrust ring with masking tape and friction fit the motor so it won't fall out. The motor is oriented with
its nozzle down. If you put it in backwards you will win closest to the pad (don't ask). You need a sturdy pad with a
short ¼" rod (1" or so). Art provides plans for a suitable monocopter pad in the instructions.
I flew this kit on both an A3-4T and an A10-3T. The A3-4T flight was longer and higher so I recommend this motor. Both flights ejected near the ground so care should be taken if people are around or if there is a fire danger.
Recovery:
After burn out the model quickly slows and tumbles to the ground.
Flight Rating: 4 out of 5
Summary:
Art's hit another home run with the Helix monocopters. They are simple, elegant, and fly great. It's the easiest way
I know to get into monocoptering. This 13mm version is fun, but I prefer the 18mm version.
Overall Rating: 4 out of 5
Brief: After reading a number of very positive reviews of the various new Applewhite monocopters, I decided to pull the trigger and order a couple myself. I was pleasantly surprised, when in addition to the pair I ordered, Art slipped one of these 13mm Helix kits in as a free bonus. I decided to quickly jump on it and am offering up this third opinion with another solid e ...
Brief: The Helix is an innovative and simple monocopter design from Art Applewhite. It is extremely simple to build and goes together quickly. It's also a hoot to fly. I was lucky enough to get to watch the flights of the prototypes as Art was developing this line and now it seems like he is the source of a monocopter renaissance. It's a lot of fun. Construction: The ...
Sponsored Ads
J.A.L. (February 14, 2009)