Madcow Rocketry - Arcas (Fiberglass) Kit

CP Method: Manufacturer
CP Position From Front: 40.00 inches
Manufacturer: Madcow Rocketry
Product Type: Kit
Reviews
  • Madcow Rocketry Arcas (Fiberglass) By Ken Tsai (February 25, 2010)

    Brief: This is the fiberglass Arcas HV from Madcow. I bought it because they were giving away CTI Pro29 3g motors with purchase, so it becomes close to a no brainer if you're in the market for the case (I was) and a fiberglass kit. Construction: Aside from it being fiberglass, this kit is almost as simple as a rocket can be. Sure, it's sport-scale, but it really is just ...

  • Madcow Rocketry Arcas (Fiberglass) By Peter Lam (November 21, 2009)

    This is a single stage 1:1.7 scale all G10 fiberglass kit with a 29mm motor mount. The kit can be purchased either with or without a recovery system. The kit is composed of: body tube, fins, centering rings, nosecone bulkhead, which are all G10 fiberglass. 2 eye bolts, 2 nuts, 2 washers, 2 1/4" launch lugs and about 10 feet of 1/2" tubular nylon. The ...

Rocksim Design Files

Flights

comment Post a Comment