Mercury Engineering - Integrator -Undefined-

CP Method: Rocksim/Rocksim
CP Position From Front: 43.50 inches
Manufacturer: Mercury Engineering
Product Type: -Undefined-
  • Mercury Engineering - Integrator By jeff ybarra (May 8, 2010)

    Brief: This is the same model as the 3x24 cluster edition . The difference is a single 29mm mount. If you are looking for a big rocket and big thrills that won't break the bank, your search is over. Construction: Instructions for this model were straight forward, no surprises. I used 5min. epoxy for all joints. I was unsure about the fiberboard shock cord mount.It seemed that ...

  • Mercury Engineering - Integrator By George Beever (July 6, 2009)

    Described as "High-Powered Thrills in a Mid-Powered Rocket". This is a single-staged, 3 X 24mm cluster rocket that builds out to 52.5 inches in length with a diameter of 4 inches. A 3FNC for those who like to cluster 24mm motors. The kit, which was packaged in it's shipping box and not bagged, consisted of two 4-inch diameter main body tubes, three 24mm motor mount tubes, fiberboard ...

Rocksim Design Files


comment Post a Comment