|Motor Size:||18 millimeters|
|Nose Cone Material:||Plastic|
|Recommended Motors:||B4-4, B6-4, C6-5|
E2X single-stage rocket kit with silver metallic finish. Components Components: Nose cone Body tube (launch lugs and elastic shock cord pre-installed) 2-piece plastic fin and engine module Parachute Construction is quick and easy. Glue the 2-piece plastic fin/engine module together Glue the body tube to the fin/engine module ...
Brief: E2X single-stage LPR with parachute and plastic fins. Construction: Parts list: 1 body tube 2 fin can halves (with fins pre-assembled) 1 plastic nosecone 1 plastic parachute (pre-assembled) 1/8" launch lug (pre-attached) Construction is extremely easy. This is how it goes: Glue two fin can halves together. Glue fin can into ...
I created an upscale Estes Quasar from the currently available Estes Metalizer kit. Components Estes Metalizer kit (Hobby Lobby) BT-56 body tube (Red Arrow) Mylar tape QUASAR decal (HP Inkjet) /h2 The Metalizer is an E2X kit that I normally wouldn't bother with except that a) it was on clearance, and b) I was bored and needed a project. The Hobby ...