Mountainside Hobbies 4" V2

By Joe Sr

Mountainside Hobbies V2 (4)

Even thought I started building this kit over a year ago I decided to add it to my build list.  This is my first HPR build and I plan on getting my L1 with this kit.

As of this date: The fins are completed, nose cone completed and primed, body tube, boat tail w/engine tube & centering rings complete and primed.

Comments:

Lester Anderson (January 1, 2012)

Pictures man, where are the pictures??

Steve Lindeman (May 28, 2012)

That's the same question I have 4 months later. I want to build one myself and likely for the same reason. I started to build my modified Big Daddy for a possible L1 attempt but opted for D/E Cluster instead. Check out my build. I also opted for the smaller new D&E powered Estes V2.

- Post a Comment -

You must be logged into RocketReviews.com to post a comment.

Build complete - ready for paint. (2012-10-10 10:16:59)

Finished the build and got it primed.  Now it's ready for paint and recovery items.

- Post a Comment -

You must be logged into RocketReviews.com to post a comment.

Lug to Rail Guide (2012-10-26 10:15:42)

Decided to change out the 1/4" brass lug for the 1010 rail guides.  Didn't take too long to grind off the lug with the dremel.  Little bit of sanding and primer and I was ready to attach the guides.  Since there will be no screws to aid in attachment I will make sure both the guides and body tube are scuffed down to a good surface for epoxy.

- Post a Comment -

You must be logged into RocketReviews.com to post a comment.

What You Can Do

• Submit a New Build