Quest Gamma-Ray Payloader

Quest - Gamma-Ray Payloader {Kit}

Contributed by Mike Goss

Construction Rating: starstarstarstarstar_border
Flight Rating: starstarstarstarstar_border
Overall Rating: starstarstarstarstar_border
Diameter: 0.97 inches
Length: 18.50 inches
Manufacturer: Quest
Skill Level: 1
Style: Payload

Quest Gamma-Ray

Brief:
The Gamma-Ray is a small sport rocket with a translucent red payload section.

Construction:
The Gamma-Ray is packaged in the standard clear plastic bag with a nice kit card with a color photograph of the completed rocket. All of the parts were in the kit and were in good shape. The kit includes a motor mount tube, motor retainer clip, body tube that is slightly larger than the motor mount tube, plastic payload section, plastic adaptor, plastic nose cone, fin material, parachute, shock cord, and self-adhesive decal sheet.

The instructions are printed on a sheet of 11 x 17 inch paper that is folded in half and a single sheet of 8 1/2 x 11 inch paper for the launch instructions. The instructions are in a logical order and have an illustration with each step. There is a wrap around fin location template and a scale printed on the instructions.

The build of the model is straight forward. You start with the assembly of the motor mount and fins, followed by the assembly of the payload section. Care should be taken in the alignment of the launch lug and the placement of the engine hook between the fins. The payload adaptor, which is made of plastic, has a couple of shortcomings. First the shoulders are very short, which does not make it Quest Gamma-Ray easy to have the payload section remain straight in the body tube. The second item is that there is a hole in the adaptor that will allow the ejection gasses to pass into the payload section. I fixed this issue by epoxying a small piece of balsa wood into the bottom of the adaptor to eliminate this issue. There are no special tools need in the construction of this rocket.

Finishing:
The instructions direct you to finish the booster section before you attach the payload section. This is logical since the payload section is completely plastic and does not require painting. After the booster section is painted, decals are applied, and a clear coat to cover the whole thing, the payload section was attached, completing the assembly of the rocket. I painted my rocket with Krylon red, which closely matches the cover art of the model. The result was a sharp looking rocket.

Quest Gamma-Ray

Construction Rating: 4 out of 5

Flight:
The recommended motors for this rocket are the Quest A6-4, B6-4, and C6-5. The preparation of the rocket is easy with the motor clip, install the motor, wadding, and parachute. I also taped the nose cone to the payload section and taped the payload section to the adaptor to make sure that all of the pieces would come back together. The shock cord is the typical Kevlar®/elastic Quest design that I have found to work very well. The parachute is a 12 inch plastic hexagon with the new shroud line reinforcements that are similar to 3 ring binder hole reinforcers. They are much better than the older style large plastic "grippers" that were previously issued with the Quest kits. These new smaller reinforcers allow the parachute to be packed more easily into the small body tube.

The first flight was on an Estes A8-3. The flight was about as perfect as you can get. Ejection was close to apogee and the descent rate with the supplied parachute was just about perfect. If a payload were to be used with this rocket, a shorter delay and a larger parachute should be used.

Quest Gamma-Ray

Flight Rating: 4 out of 5

Summary:
Overall this is a great little rocket. The retail price of this rocket is $8.50 which is a good value in itself, however, I bought this one at one of the famous Hobby Lobby half price sales, so it cost me only $4.25--an excellent value. I would like to see a longer shoulder and a solid bulkhead in the payload adaptor, however with care this should not be a major issue.

Overall Rating: 4 out of 5

Flights

Comments:

avatar
K.A.C. (June 11, 2005)
i really like this rocket. didnt paint it, but wrapped it up in postal tape. flew it from the local park and it went over the road, probably into someones backyard. o well, not a big loss.

comment Post a Comment