Shockwave Rocketry 3-in. Von Karman Fiberglass 6:1 Nosecone
Shockwave Rocketry - 3-in. Von Karman Fiberglass 6:1 Nosecone {Component} (3-in. Von Karman)
Contributed by Ken Adams
| Construction Rating: | starstarstarstarstar_border |
| Flight Rating: | starstarstarstarstar_border |
| Overall Rating: | starstarstarstarstar_border |
| Published: | 2011-12-21 |
| Manufacturer: | Shockwave Rocketry |
Brief
Components
For a scratch built project, I purchased a Shockwave fiberglass 3" Von Karman nose cone.
I loved that it was all fiberglass and not coated with polyester gelcoat.
Construction
Pros: Great price!, quality product, easy to finish.
Cons: Maybe it is a con to some, there is no bulkplate included. That was fine by me! I prefer to use a loop of nylon or kevlar to attach the nose, rather than a bolt.
Finishing
Finishing was easy I just washed and sanded it, and gave it several coats of primer followed by more sanding, red paint, more sanding, and finally some clear, followed by buffing.
Flight
I used this on a scratch built project. Here is the flight video:
Recovery
Getting a hard bang on the Salt Flats didn't cause any trouble.
Summary
Shockwave makes a great product and it has a substantially lower cost than a filament wound model of the same specs.
Sponsored Ads
 |
 |