Quest - Terrier-Orion

Quest - Terrier-Orion Kit

Quest - Terrier-Orion {Kit} By Brian Ray (March 4, 2008)
Brief: Scale model of the Terrier-Orion, a two-stage payload carrying rocket. This kit features 8 fins, BT-55 and BT-50 body tubes, plastic parachute, and adhesive decals. The kit is flown as a single stage. Construction: Die-cut balsa fins Kevlar ® cord and shock cord materials 11” BT-55 body tube 16” BT-50 body tube PNC-50 nose cone ...
Quest - Terrier-Orion {Kit} By Matt Gillard (February 19, 2008)
Brief: This is a rocket with a double set of four fins and 18mm motor. I got it as a free rocket from EMRR’s rocket video competition. It came in a clear bag with the usual art card. Construction: Kit consists of: 1 launch lug 1 length elastic shock cord 1 length of Kevlar ® cord 14 inch parachute. Nose cone Plastic transition 2 Body ...
Quest - Terrier-Orion {Kit} By Todd Mullin (February 18, 2008)
Brief: The Quest Terrier-Orion is a single stage, parachute recovery, sport scale version of the two stage sounding rocket. Quest rates this as a level 2 kit. Construction: All of the components for the kit came in a sealed plastic bag with a hang tab and full color face card. All the components were present and in good condition. In the bag were: 1 10-7/8" T35 ...

Terrier-Orion (Modification) By Brian Ray
This was a kit bash to turn the Quest Terrier-Orion into a two-stage model. The modification was really simple: I simply added a motor mount to the upper section of the model. The extra 18mm motor mount was taken from the remnants of an Estes SS1 kit that had experienced some problems and was not going to be built normally. Modifications: The actual construction was straightforward and ...