Yank Enterprises - The Bullet Kit

CP Method: Rocksim/Barrowman
CP Position From Front: 31.49 inches
Manufacturer: Yank Enterprises
Product Type: Kit
Reviews
  • Yank Enterprises - The Bullet {Kit} By Nick Esselman

    (07/06/00) I'm a big fan of what I call "stubby" rockets, which have a 10:1 Length to Diameter ratio or less. So when I saw Yank Enterprises' "The Bullet" I wanted to give it a try. This is also my first Yank Enterprises kit so that would also be a new experience. See my 4" Stubby Rocket Comparison Page The Bullet is not a complicated looking rocket, nor ...

  • Yank Enterprises - The Bullet {Kit} By Gary Sinclair

    ( Contributed - by Gary Sinclair) Brief: Fiberglassed airframe and fins, external fin can assembly, removable bulkhead in nosecone. Modifications: Using my trusty Foodsaver I vacuum bagged both fins and body tube using one layer of 6oz fiberglass with West Systems Epoxy. Before vacuum bagging the fins I used my Dremel sanding drum to bevel the fins. After the body tube had ...

Rocksim Design Files

Flights

comment Post a Comment