CP Method: | Rocksim/Rocksim |
CP Position From Front: | 12.03 inches |
Decals: | Waterslide |
Diameter: | 0.74 inches |
Fin Material: | Balsa |
Length: | 15.37 inches |
Manufacturer: | Custom Rockets |
Model: | 10025 |
Motor Size: | 18 millimeters |
Nose Cone Material: | Plastic |
Original Price: | $7.95 |
Power: | Low-Power |
Product Type: | Kit |
Production Years: | 1999- |
Recommended Motors: | B6-2, B6-4, C6-3, C6-5 |
Recovery: | Parachute |
Skill Level: | 2 |
Status: | In-Production |
Style: | Contest, Payload |
Weight: | 0.80 ounces |
Construction: Parts included: 1 18mm ID tube 2 part nose cone it splits in half along the horizontal axis and is held together with a mylar ring 3 Die cut fins elastic shock cord Engine stop ring (no hook) 12 inch parachute. First off the quality of the kit was mixed. The body tube was the same. The Fins were die cut out of a very lightweight but somewhat ...
A lightweight, minimum diameter egg lofter with an efficient aerodynamic design. The kit comes in the typical "hanging bag" style package. As such, it doesn't protect the kit from any damage incurred in shipping, and this one was indeed damaged in shipment, though I couldn't tell until the package was open. The kit featured a length of 18mm tubing, a very unusual plastic nose cone, a ...
Now this is an egg lofter! Custom has trimmed the weight and size of its new Elite down to the bare essentials required to get an egg as high into the air as possible. The light-weight payload section with its power series nose cone (often mistakenly called "parabolic") is its most prominent feature and is reminiscent of the old Nova Egg Cone once found on Apogee's Hydra . The minimum diameter ...
Sponsored Ads