bannerbanner
Blogs >> Model Rocket Building >>

Model Rocket Building Blog

Sport Rocketry / Rocketry Builds / Excelsior Rocketry / Plans / Nike Goon

Nike Goon Build, Part 9, Black Trim

Here's the smaller fins. A strip was set between the two fin triangles to keep the cuts in line. Interesting thing about the trim. Down the root edge there is a thin white line. The squares set on the body tube are separate pieces. You don't have to worry about tucking the vinyl into the root edge. The upper roll pattern was easy enough. Wrap a strip all the way around the body tube. Cut at the mid point below the small antennas and halfway between the two antennas. Lift out every other piece ... [Read More]

 

FPV