Motors / Estes / B6
Flight of the 3D Printed Mini Cineroc 808

Flight of a 3D Printed Mini Cineroc with a 808 1080p camera on a custom built dual canted motor mount rocket. Flew took place in Lajas, Puerto Rico, on May 8th 2019. Flight conditions were not the best as there were 15-18mph wind gusts but the rocket and camera pod were recovered successfully. Used two Estes B6-4 motors. I thing it reached about 400 feet of altitude before ejecting the parachute. Video shows little spin on boost thanks to the canted motors but the parachuted deployed while the rocket was coasting up. Enjoy!

 Rocketry Product: Estes - B6 Single-Use Motor {Motor}

Author Raul Pena
Duration 98 seconds

comment Post a Comment