Bullpup 12D, all standard. Finished with 1 coat wood filler, 2 coats primer, 3 coats paint, and 3 coats clear lacquer.
| Flight Date: | 2018-01-29 |
| Rocket Name: | Bullpup 12D |
| Kit Name: | Estes - Bullpup 12D {Kit} (007000) [1996-] |
| Flyer's Name: | Graeme Cooke |
| Motors: | A8-3 |
| Wind Speed: | 20.00 mph |
| Launch Site: | Brighton Ontario, Canada |
| Actual Altitude: | 100 Feet |
2nd flight of this rocket. First flight on a B6-4 because I thought A8-3 would be under powered. This flight was low, around 100 feet, but picture perfect. Windy conditions, so launched at about 20° angle into wind. Parachute popped just past apogee. A 2 second delay would be better. Good chute. Landed about 10' from the pad. Will definitely use the A8-3 again just for fun in a small launch area.
| Stage | Motor(s) |
|---|---|
| 1 | Estes A8-3 |
![]() |
![]() |