Flight Log - 2011-04-09 - K Sonesen's Steppin' Razor (Tube Fin)
This is a Larry Brand design that I assembled from parts contained in a LOC Precision Lil Nuke kit and an extra length of 54mm tubing. LOC 54 mm tubing is motor mount grade so it's a bit thicker than most. I also ordered a 6" long payload bay kit to complete the build.
Larry's article on the original Auracle 54 is sketchy on details and so I relied on the photgraphs accompanying the article. When all was said and done, I'm happy with the way it turned out. In retrospect, I will never again attempt a tube fin with tapered ends.
| Flight Date: | 2011-04-09 |
| Rocket Name: | Steppin' Razor (Tube Fin) |
| Flyer's Name: | K Sonesen |
| Motors: | G80-7 |
| Expected Altitude: | 1,100.00 Feet |
| Wind Speed: | 5.00 mph |
| Launch Site: | SARG - Amoruso Field |
| Actual Altitude: | 1,615.00 Feet |
The G80 kicked this one up as high as any I've seen and I was glad to have swapped out the 30" Topflight for a 28" LOC chute. Again a straight boost. It's what tube fins do.
| Stage | Motor(s) |
|---|---|
| 1 | CTI 93G80-14A-7 |
Sponsored Ads
 |
 |