This is a Larry Brand design that can be found here on EMRR Rocket Reviews if you search on "Larry Brand" or "Sardo XXL".
This rocket has a 38mm motor mount and is constructed using mostly LOC parts although I did use simple postal mailing tubes for the airframe and tube fins. The tube fins are laminated with an inner half-doubler made from postal tube. All up weight (recovery, links, nomex blanket, 36" Topflight chute but NO MOTOR) is approximately 35 oz.
Larry Brand describes this rocket as an upscale of his Auracle 54 design which I have also built and named "Steppin' Razor". Therefore, this one is named "Steppin' Razor II".
I made my level 1 certification flight with this bird. Successfully, too.
This rocket has been updated to dual deploy in 2015.
| Flight Date: | 2011-12-10 |
| Rocket Name: | Sardo XXL (Tube Fin) |
| Flyer's Name: | K Sonesen |
| Motors: | H123W-M |
| Expected Altitude: | 1,600.00 Feet |
| Wind Speed: | 5.00 mph |
| Launch Site: | SARG - Amoruso Field |
| Actual Altitude: | 1,624.00 Feet |
This was a flight that hit the sim apogee prediction with 20 feet according to the one altimeter that I remembered to arm. Unfortunately the second altimeter was active but I failed to clear the previous flight's data. At least I have onboard video of the launch so can't complain. By the way, my tube fin whistles!
| Stage | Motor(s) |
|---|---|
| 1 | Aerotech H123W-0 |
Related Videos
-
OD's Steppin Razor II on H123W (Ground view) 12-10-2011
play_circle_outline 00:05 -
OD's Steppin Razor II on H123W 12-10-11
play_circle_outline 01:55
Sponsored Ads
 |
 |