Flight Log - 2012-04-07 - K Sonesen's Sardo XXL (Tube Fin)

This is a Larry Brand design that can be found here on EMRR Rocket Reviews if you search on "Larry Brand" or "Sardo XXL".

This rocket has a 38mm motor mount and is constructed using mostly LOC parts although I did use simple postal mailing tubes for the airframe and tube fins.  The tube fins are laminated with an inner half-doubler made from postal tube.  All up weight (recovery, links, nomex blanket, 36" Topflight chute but NO MOTOR) is approximately 35 oz.

Larry Brand describes this rocket as an upscale of his Auracle 54 design which I have also built and named "Steppin' Razor".  Therefore, this one is named "Steppin' Razor II".

I made my level 1 certification flight with this bird. Successfully, too.


This rocket has been updated to dual deploy in 2015.

Flight Date: 2012-04-07
Rocket Name: Sardo XXL (Tube Fin)
Flyer's Name: K Sonesen
Motors: H180W
Expected Altitude: 1,200 Feet
Wind Speed: 3.00 mph
Launch Site: LUNAR - Snow Ranch

Looks like this was my first 39/240 reload.  The H180W is nice solid motor. Not too thrusty, not too slow.  Basically a Goldilocks motor.


I had a nice boost, acceptable recovery, and a landing that bent one of my tube fins so it will require some attention.  Nothing major.  Nice flight otherwise.

StageMotor(s)
1Aerotech H180W

 

comment Post a Comment