NRC B Payload flight using my NARAM 60 13mm payload model flown in a 2 stage configuration.  I cut the fin can off the second model and used it as a booster stage.  Got a great boost out of the tower (no piston), and a good staging event.  Saw the ejection event but could not track the rocket against the high clouds.  Found the booster near the launch tower, someone else recovered the sustainer.  Flight was DQ'd due to ejecting the sustainer motor.  The payload section had separated at ejection but the recovery streamer stayed lodged in the BT.  To top it all off, the MicroPeak altimeter did not record a flight event.  At least I got everything back relatively undamaged.