Flight Log - 2012-01-14 - Matthew Bond's 1.77x Upscale Duster "Slick Willy"

An upscaled Thrustline Duster, using Semroc body tubes and nose cone, 1/8" plywood fins, 38mm motor mount.  Dual deploy using a Perfectflight MAWD, 12" Top Flite drogue chute, and a 36" hemispherical main by Spherachutes.  My level 1 certification rocket.

Flight Date: 2012-01-14
Rocket Name: 1.77x Upscale Duster "Slick Willy"
Kit Name: Scratch - Upscale Duster {Scratch}
Flyer's Name: Matthew Bond
Motors: I236-ALTIM
Expected Altitude: 4,250.00 Feet
Wind Speed: 2.00 mph
Launch Site: ROC
Actual Altitude: 4,428.00 Feet

First flight of 2012, 20th flight of my level 1 rocket, still going strong.  Fast off the rail, super straight boost, way up there.  Arcing over near the top of the climb.  Drogue looked good at apogee, saw it the whole way down.  Harness appeared to be tangled up quite a bit as it got lower.  Main charge fired on time at 500 feet, but the main chute immediately became tangled.  Landed flat under drogue.  No damage to the rocket.  both the main and drogue harnesses severely tangled.  Not sure but it looks like the avionics bay might have seperated at apogee and the gotten the harnesses tangled.  Cracked the case on my radio tracker (again).  The highest recorded flight on this rocket (on any of my rockets for that matter).

StageMotor(s)
1CTI 413I236-17A-ALTIM

 

comment Post a Comment